The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop Moto Guzzi

New Spares New from Gutsibits

Sort by Title

Sort by Price

Page 2 of 7

1 2 3 4 5 6 7

Seal Rocker Cover

ENA23700 Fits Centauro, Daytona, MGS-01

Seal for valve cover

You may also require ENA93631 for the spark plug tunnel

4 in stock

30023700-z 30023700 GU30023700 30 02 37 00
3002 3700 3002.3700 30.02.37.00

Dimensions:
2.6mm cross section

£6.25

INC VAT

£5.21 EX VAT this is the price you will pay if you are ordering from outside the UK

Idle Screw Kit

FUA93600 Fits 1100 Sport Carb, Cali 1100 (carb), 850/1000 ALL Models, V35 ALL, V50 ALL, V65 ALL, V75, Nevada 350, Nevada 750 (1991-2003)

Dellorto kit containing idle adjust screw, o ring, spring and washer

Fits all VHB, PHF, PHBH and PHM carbs

More than 5 in stock

13936600 GU13936600 13 93 66 00
1393 6600 1393.6600 13.93.66.00

£10.95

INC VAT

£9.12 EX VAT this is the price you will pay if you are ordering from outside the UK

Carb Top Elbow Kit

FUA53036 Fits Cali 3, Cali 1100 (1994-1997), Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Spada 3, Mille GT, T5, V35 ALL, V50 ALL, V65 ALL, Lario, Imola, Nevada ALL, T3, T4, 1000 SP, V7 Sport, 750S, S3, Convert, G5

Ninety degree Dellorto M6 cable elbow for carb top with rubber and adjuster

More than 5 in stock

14937950 GU14937950 14 93 79 50
1493 7950 1493.7950 14.93.79.50

£8.95

INC VAT

£7.46 EX VAT this is the price you will pay if you are ordering from outside the UK

Fuel Tap LH With Sensor

TAA31460 Fits Nevada 750 (1991-1997), Nevada 350

Left hand fuel tap with fuel level sensor

Two pin connector block for fuel sender

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

31105460 GU31105460 31 10 54 60
3110 5460 3110.5460 31.10.54.60

Dimensions:
Stem 142mm 16mm thread

£39.00

INC VAT

£32.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Manual Petrol Tap

TAA01460 Fits Cali Stone, Daytona, Centauro, V11 Sport, Cali EV, 1100 Sport IE, Quota 1100, Cali 3 IE

Manually operated fuel tap or fuel valve. Operated by turning base of tap. Supplied with nut and sealing washer

Can be used to replace electronic fuel solenoid valve 03105300 and manual fuel tap 29105460

variable availability Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

01105460 GU01105460 01 10 54 60
0110 5460 0110.5460 01.10.54.60

Dimensions:
16mm threaded section, 135mm height overall, 13mm OD spigot

£38.00

INC VAT

£31.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Cylinder Head Oil Feed Pipe Set Stainless Braided Hose

ENA14601 Fits 750S, V7 Sport, S3, 850T, Convert, G5, Le Mans 1, Le Mans 2, 1000 SP, T3, T4

Stainless steel braided hose oil pipes for head to crankcase connection. Replaces leak prone rubber pipes. Includes V shaped banjo.

Always replace crush washers (6 x SIA12200) when fitting new oil lines, you may also require three of our banjo bolts ENA95990

Order now and we will post your order within 28 days.

14153601 GU14153601 14 15 36 01
1415 3601 1415.3601 14.15.36.01

Dimensions:
Reach of approx. 190mm from crankcase

£69.95

INC VAT

£58.29 EX VAT this is the price you will pay if you are ordering from outside the UK

Ignition Coil 12 volt

ELA14500 Fits G5, Convert, Cali 2, Cali 3, Le Mans 1, Le Mans 2, Le Mans 3, Le Mans 1000, Mille GT, Spada ALL, S3, T3, T4, T5, V7 Sport

12 volt single lead ignition coil with HT lead

Suitable for points and Motoplat equipped big twins. NB models with Digiplex ignition use ELA30716.

Order now and we will post your order within 7 days.

14716502 GU14716502 14 71 65 02
1471 6502 1471.6502 14.71.65.02

Also fits Ducati, MZ ETZ 250/251

Dimensions:
40mm diameter body x 140mm overall (Length may sometimes vary slightly depending upon supplier).

£44.00

INC VAT

£36.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Domino Switchgear L/H Pattern (Lights, Dip, Horn, Indicators and Pass)

ELA01730 Universal Part

Domino left hand switchgear with lights on - park - off, high and low beam, pass, indicator and horn switches. Same style switch as ELA01738.

Already wired in to 9 pin block connector (you may need to alter the wiring on your bike to correspond to this block connector). Originally fitted as standard to early V11 Sport models. See the wiring diagram on our technical documents page for help installing this switchgear. See Greg Bender's website for a custom sub-loom that enables easy fitting of this part to models previously fitted with LEGO style swithgear. Small block models will require an adapter to retain all the switch functions.

this part is due in stock from our Italian suppliers This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

01738030 GU01738030 01 73 80 30
0173 8030 0173.8030 01.73.80.30

Dimensions:
520mm lead

£88.00

INC VAT

£73.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Mistral Racing Silencers Reverse Cone Long Satin Pair

EXA30370 Fits V7 Classic, V7 Stone, V7 Special , V7 II Stone, V7 II Special

Pair of satin finish stainless steel reverse cone performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers. Note that the optional Guzzi factory centre stand is not compatible with these silencers (unless you make up a centre stand stop bracket to prevent the stand touching the underside of the silencer). Silencer gaskets now included with these silencers
No remap required

Release the music in your Guzzi!

Order now and we will post your order within 28 days.

£640.00

INC VAT

£533.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Tail Light Lens

LIA65700 Fits 1000 SP, T4, T3 (1980-1983), Le Mans 1 (series 2), G5 (series 2), Convert (series 2), Le Mans 2, Le Mans 3, V35 I, V35 II, V50 I, V50 I, V50 II, V50 3, V65, 750T

Red lens for oblong rear light, includes clear section to illuminate number plate

Can be used to replace tail light lens on Lario and Le Mans 1000, note that this one does not have side 'wings' but is functional on these models

variable availability Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

65741700 GU65741700 65 74 17 00
6574 1700 6574.1700 65.74.17.00

£14.50

INC VAT

£12.08 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 2 of 7

1 2 3 4 5 6 7