Pod type air filter for increased air flow

Made from a high performance twin layer foam this K & N type air filter is designed to offer improved and unrestricted airflow whilst offering adequate filtration. Washable and reusable (use hot soapy water). Best run dry for road. Fits PHF 30 and PHF 36 Dellorto carbs. You may find that a 5-10% increase in main jet size helps to make the most of the increased air flow with this filter

 This part is available by special order, request a quote

Dimensions:
91mm high filter, 48mm ID for carb mounting

Fuel pipe assembly including 'x' crossover piece

See FUA00004 for pipe clips. Can also be used in place of Guzzi ref. 12106501 on Loop frame models if cut to length

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

29106500-z 29106500 GU29106500 29 10 65 00
 2910 6500 2910.6500 29.10.65.00

Also fits Guzzi V7 Special, V7 700

Dimensions:
540mm max. end to end

Brembo pad pin kit for Brembo caliper fitted to rear, single pin. See BRA33799 for rear calipers with two pins

Brembo ref. 120511611

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 31659181 GU31659181 31 65 91 81
 3165 9181 3165.9181 31.65.91.81

Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons

A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

Dimensions:
38mm OD x 20mm

Front crank oil seal

Directional oil seal. Also known as Guzzi ref. 886363

 90402842 GU90402842 90 40 28 42
 9040 2842 9040.2842 90.40.28.42

Dimensions:
28mm x 38mm x 7mm

Sprung timing chain tensioner kit for small block models, supplied ready for you to assemble

Direct replacement for standard tensioner.

1A0170355

Thin metal timing cover gasket

For 2V per cylinder models only. Also known as 05001230 Does NOT fit 4V per cylinder models

 05001231 GU05001231 05 00 12 31
 0500 1231 0500.1231 05.00.12.31

Rubber insert and plastic cap for PS 15 Brembo rear master cylinder reservoir, this type does not have a level switch. Also fits round Brembo PS 17 master cylinder reservoirs.
No longer available - superceded by BRA14901

Only for brake fluid reservoirs mounted on the PS15 master cylinder. Also known as Guzzi ref. 17661150. This cap does not contain a fluid level switch (your original cap may). Brembo ref. 110430820. Does not fit replica PS 15 master cylinders BRA10802 and BRA07338.

See BRA14102 for alternative aluminium cap

 14661100 GU14661100 14 66 11 00
 1466 1100 1466.1100 14.66.11.00

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR

Cush drive rubber set

Set of 6 rubbers per kit

32632510

Full workshop manual for ABS equipped V7 850 models covering maintenance, overhaul and detailed repair. Note that this manual does not include detailed engine overhaul

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

2Q000466

Dimensions:
A4, 329 pages black & white