This adjustable fuelling modifier uses the lambda sensor signal to the ECU. By modifying that signal it achieves an improvement in low and midrange throttle response. Comes with wiring harness and instruction manual, installation is simple and does not require any specialist tools. Suitable for all single throttle body V7, V9 and V85 TT models.

Rapid Bike EASY: A base level simple plug and play modulator equipped with a microprocessor managing the lambda sensor signal to optimize the air/fuel ratio, improve the engine efficiency and eliminate power gaps typical of the low and medium rpm range.

See installation instructions here.

Stainless steel front engine mounting stud kit. Kit contains one long engine M12 x 1.25 threaded stud (with plain section in centre), two M12 half nuts, two M12 crinkle washers and four standard M12 washers - all in A2 stainless steel

The original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505
Differs from original part whcih is a bolt, this stud make is easier to fine tune the position of the stud between header pipes

 This part is due back in stock soon, call 01484 841395 to reserve yours

If you would like to be emailed once this item is available again then click here

 14429500 GU14429500 14 42 95 00
 1442 9500 1442.9500 14.42.95.00

Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

Lightweight aluminium M20 gearbox and drive box filler plug (big twins), drive box level plug (small twins).

 Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

 12022600 GU12022600 12 02 26 00
 1202 2600 1202.2600 12.02.26.00

Dimensions:
M20 x 1.5

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 Sorry, this part is no longer available.

Dimensions:
2XL

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 Sorry, this part is no longer available.

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 Sorry, this part is no longer available.

Quality workshop overall in Guzzi red with a large classic Moto Guzzi logo in white across the back of the shoulders. Highly durable and extremely practical, these overalls come complete with zipped chest pockets, phone and hip pockets for tools and essentials. Ideal as a gift

Features:

• Two zipped chest pockets.
• Tool pocket.
• Rule pocket.
• Two swing pockets with side access.
• Full back elastication and an action back.

Fabric:

• 65% polyester, 35% cotton. 245gsm.

 Sorry, this part is no longer available.

Roller tappet kit A for converting your 4 valve per cylinder model to the later rollerised tappets

Your engine will need inspecting to work out which kit is required, this cannot be deduced from engine or chassis number. Further information about which kit you may need can be found here.
For this kit see Moto Guzzi factory bulletin no.20 from 2013. We recommend that you also get your fuelling map updated following this upgrade for maximum benefit

 Availability varies on this part, call us to check availability

If you would like to be emailed once this item is available again then click here

1A002060

Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours