
Shop headings: New Spares | Used Spares | Accessories | Brands

JMC MAXX Fork Oil SAE 10W
High-performance fork oil based on synthetic base oils, with excellent low-temperature behavior, superior damping properties and high aging resistance, for on- and off-road use.
Application:
The JMC MAXX fork oil SAE 10W has been specially developed for use in motorcycle forks and shock absorbers. Its excellent viscosity / temperature behavior ensures safe operation even at high temperatures, as well as sensitive response at very low temperatures.
Advantages:
- excellent viscosity / temperature behavior and high shear stability
- Sensitive response even at extremely low temperatures
- highest resistance to aging and oxidation by synthetic base oils
- even at high permanent temperatures and extreme loads, best wear protection properties for reliable operation and longest service life
- minimized froth
- protects reliably against corrosion, wear, sludge and adhesive
- neutral against sealing materials
- Mixable and compatible with other branded fork oils of the same quality; however, a full oil change is recommended to take full advantage of the product
Note:
JMC MAXX Fork oil SAE 10W must not be mixed with glycol- and silicone-based fluids (eg brake fluids DOT 3/4 / 5.1 or DOT 5).The product is part of the Fork Oil series, which includes products with a different viscosity gradient to be selected in relation to the manufacturer's requirements and/or the damping action desired.
It is also possible to obtain intermediate grades by mixing with other Fork Oil grades.
More than 5 in stockGU30530527
Dimensions:
1 litre
£14.00
INC VAT
£11.67 EX VAT ![]()

Ignition switch cover in black rubber. Cap is embossed 'Moto Guzzi'
3 in stock14735800-z 14735800 GU14735800 14 73 58 00
1473 5800 1473.5800 14.73.58.00
Dimensions:
39mm ID x 48mm x 50mm
£11.00
INC VAT
£9.17 EX VAT ![]()

New type clutch friction plate for models with deep splines with deep splined centre
2 plates required- thicker side of each friction plate should face transmission.
Also known as Guzzi ref. 30084410, 03084400, 29084450
V11 Tenni, Rosso Mandello and Scura have a single plate clutch which uses a different friction plate (unfortunately out of production)
These can be fitted to earlier 850 and 1000 models if the early shallow splined clutch centre is replaced with the later deep splined type. See our kit CLA20302 to update early 850/1000 models. Clutch plate alignment tool also available, see TOA30510
4 in stock 05084430 GU05084430 05 08 44 30
0508 4430 0508.4430 05.08.44.30
£59.00
INC VAT
£49.17 EX VAT ![]()

Black clutch lever
See CLA17605 for this lever in aluminium finish. Can also be inverted for use as a brake lever on V50 II and V35 I with cable operated brake
1 in stock14605750-z 14605750 GU14605750 14 60 57 50
1460 5750 1460.5750 14.60.57.50
Dimensions:
5.8mm internal diameter mounting hole
£22.00
INC VAT
£18.33 EX VAT ![]()

NGK PMR8B laser platinum spark plug used for the second plug on dual plugged 2 valve models and main spark plug on 4 valve models
Guzzi also refers to this as a PNR8B plug. Use tool TOA05931
More than 5 in stock 05717030 GU05717030 05 71 70 30
0571 7030 0571.7030 05.71.70.30
Dimensions:
For 10mm plug hole
£26.00
INC VAT
£21.67 EX VAT ![]()

Manual right hand petrol tap with nut and filter. On, Off and Reserve settings.
Point on lever faces back in off position. Can be used to replace electronic fuel solenoid valve 37105305
More than 5 in stock17105460-z 17105460 GU17105460 17 10 54 60
1710 5460 1710.5460 17.10.54.60
Dimensions:
16mm threaded section, 8mm fuel pipe spigot
£12.60
INC VAT
£10.50 EX VAT ![]()

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes
Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549
More than 5 in stock 90403548 GU90403548 90 40 35 48
9040 3548 9040.3548 90.40.35.48
Dimensions:
47mm OD
£18.50
INC VAT
£15.42 EX VAT ![]()

M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer
NB this is a half nut. Can also be used as alternator retaining nut 92603516
5 in stock92602516-z 92602516 GU92602516 92 60 25 16
9260 2516 9260.2516 92.60.25.16
Dimensions:
M16
£8.50
INC VAT
£7.08 EX VAT ![]()

Round 12v two pin flasher relay
See FRA17720 for rubber mount, item may look different to this please take into consideration before ordering.
More than 5 in stock 17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20
Dimensions:
32mm diameter
£7.60
INC VAT
£6.33 EX VAT ![]()

Small front battery strap
3 in stock14704800-z 14704800 GU14704800 14 70 48 00
1470 4800 1470.4800 14.70.48.00
Dimensions:
240mm x 43mm x 8mm overall
£8.80
INC VAT
£7.33 EX VAT ![]()