Front brake master cylinder cap and rubber kit for Brembo PS 13 master cylinder. Check the screw holes in your master cylinder are diagnally opposed (as seen top left and bottom right corners when sitting on bike)

Reservoir cap replaces Guzzi ref. 2B001928

 03661145 GU03661145 03 66 11 45
 0366 1145 0366.1145 03.66.11.45

Pair of sintered EBC FA778 HH rear brake pads. High performance sintered pads with twin pin pin fitting.

Stainless steel tool for removing Bosch alternator rotor. Will also fit Saprisa.

Simply screw in until the rotor pops off

Also fits Benelli Sei 900 (Series 2)

A fully synthetic oil for engines/transmissions requiring a 10w50 viscosity. Formulated with the latest additive technology for maximum performance in 4 stroke applications. Includes a constant high friction profile for wet clutch performance meeting the JASO MA2 specification.

Formulated with the latest additive technology for maximum performance in 4-stroke motorcycles. Includes a constant high friction profile for wet clutch performance. Provides high temperature endurance. Optimisation for four-stroke engines to give cleanliness and improved operation. Excellent oxidation resistance and valve trainwear protection. Seal compatibility. Suitable for use in machines fitted with oil immersed ‘wet’ clutches.

PERFORMANCE PROFILE: API SN, SM, SL, SJ JASO MA2, JASO MA1, JASO MA

 This part is due back in stock soon, call 01484 841395 to reserve yours

Dimensions:
1 litre

1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5 Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

750S 0.360 ml Bevel box

 More than 5 in stock

Dimensions:
1 litre

[ CLOSE WINDOW ]

[ CLOSE WINDOW ]

1 litre of Millers 75w-140 synthetic final drive lubricant and gearbox oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 75w140 synthetic gearbox and differential oil with performance additives designed for motorsport use.

700ml required for V7 and V85TT. 225ml required for V100.

Low friction reduces transmission noise.No need to use separate moly additive with this oil.


Please note this part CANNOT be posted outside of the UK mainland area

Quality Ariete fork Seal

Also known as Guzzi ref. 03530526 and 03530524

AP8163095

Dimensions:
45mm x 58mm x 11mm

Fork seal for Marzocchi M1R forks

30530502-z 30530502 GU30530502 30 53 05 02
 3053 0502 3053.0502 30.53.05.02

Also fits Laverda SFC1000

Dimensions:
41.7mm x 55mm x 7.5/10mm

Cartridge oil filter UFI 23 149 00
Fits Daytona 1000 models where filter screws into base of sump. This is an 14 sided UFI filter. Use tool TOA41005 if your filter is located inside the sump

You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300

GU14153000

Input shaft oil seal for gearbox

 90403245 GU90403245 90 40 32 45
 9040 3245 9040.3245 90.40.32.45

Dimensions:
45mm OD