Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simplifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi. Uses oil filter SIA14530

Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black by special order - ENA14006

 This part is available by special order, request a quote

Stainless steel footboard in stainless steel, supplied without rubber

Footboard rubber available as FRA18448. May require minor modification to fit Cali 2 and Cali 3. Also known as Guzzi ref. 29443401

 This part is available by special order, request a quote

 03443555 GU03443555 03 44 35 55
 0344 3555 0344.3555 03.44.35.55

Black painted steel footboard supplied with separate rubber. Fasteners included.

Please note that rubber is supplied unattached and ready for glueing.

 This part is available by special order, request a quote

 18443450 GU18443450 18 44 34 50
 1844 3450 1844.3450 18.44.34.50

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 Sorry, this part is no longer available.

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 Sorry, this part is no longer available.

Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.

 Sorry, this part is no longer available.

Replacement green LED in chrome bezel for Gutsibits clock surrounds ACA01001 and ACA01002

These 12v LEDs include a resistor, wires should be soldered to the mini spade connectors on the base of the LED

 5 in stock

Black oval Gutsibits Racing sticker, complete with tricolore and chequred flag motif.

Ideal for covering up marks on bodywork!

 More than 5 in stock

Pair of black leather Buffalo panniers to fit Hepco and Becker C-Bow pannier frames. With their dynamic, timeless look, these HEPCO&BECKER saddlebags enhance any bike. Our saddlebag leather collection is made of smooth pure 3-4mm thick cowhide with black aniline dye throughout. Extra strong, tearresistant seams for the best stability and long life. All of our saddlebags are produced especially for us in our traditional leather craft shop. The bags hold their shape extremely well thanks to hidden shape reinforcement and a plastic double rear wall - no dropping, no flapping.

• Lockable leather bags for C-bow carriers
• Incl. C-Bow counter support on the back wall of the bag Incl. Key and cylinder
• you only need these bags and the model specific C-Bow carrier. No other adapters needed
• 3-4mm thick cow leather
• Recommended load: 5kg per side (please check info of model specific carrier)
• Sturdy back wall made of ABS plastic
• Tanning according to strict environmental regulations
• Leather from European animal husbandry
• Highest processing quality
• ged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

Effective capacity of 21l, larger version also available - call for details

 This part is available by special order, request a quote

Complete chromed Hepco and Becker rear luggage rack and pannier rails for Hepco and Becker panniers

To fit these frames, you may need to lower the tail light so this does not foul the rack. You may also need to drill the mudguard if you are to use the brace for the pannier frames. Pillion pegs may need moving forward slightly to accomodate panniers.

 This part is available by special order, request a quote