Pair of universal chromed handlebars, low rise

Not suitable for V65 GT, Mille GT or other models with wide handlebar clamps. Note wide spacing of knurled sections sits outside handlebar clamps on T3, V50 etc... - see dimensions if in doubt about suitability for your bike

 1 in stock

Exhaust gasket, silencer bush or muffler gasket shim for exhaust joint between silencer and downpipe

2 exhaust bushes required per bike

 More than 5 in stock

 91113826 GU91113826 91 11 38 26
 9111 3826 9111.3826 91.11.38.26

Round 12v two pin flasher relay with warning buzzer, reduces risk of indicators being left on.

Includes mounting rubber

 1 in stock

 17750520 GU17750520 17 75 05 20
 1775 0520 1775.0520 17.75.05.20

Black fairing and screen screw kit containing ten black M6 cross head screws, nuts and washers

 3 in stock

 98326013 GU98326013 98 32 60 13
 9832 6013 9832.6013 98.32.60.13

Bright aluminium finish brake lever, 4 position span adjustment

See HAA10850 for lever pivot pin

 1 in stock

01605630-z 01605630 GU01605630 01 60 56 30
 0160 5630 0160.5630 01.60.56.30

Also fits Aprilia RS250

Pair of YSS rear shock absorbers, milled aluminium body with black springs.

Continuous preload adjustment, fully rebuildable. An excellent replacement for tired IKON and KONI Dial-a-Ride shocks

 1 in stock

NGK CPR8EB-9 spark plug

See TOA05931 for spark plug spanner

 More than 5 in stock

 887481 MG887481

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 12 volt coils and can be used to replace points or Bosch electronic ignition on models with Bosch charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. We recommend fitting Dyna coils ELA14101 with this kit. If you wish to combine this kit with uprated charging system ELA00502 you will need to make or source longer studs (M5 x 67mm x 2) for pickup, and longer centre bolt (M8 x 58mm wasted). See ACA50001 for distributor blanking plate if required

 1 in stock

1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5 Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

 More than 5 in stock

4 litres of fully synthetic ZFS 4T SAE 20W-50 engine oil. Moto Guzzi specify this oil grade for non PI Cali EV models. This is latest generation synthetic oil which gives best protection for your engine, even at extreme temperatures. The special formulation ensures great thermal and shear stability

• Constant high friction profile for wet clutch performance meeting the JASO MA2 specification
• A fully synthetic base oil and additives provide high temperature endurance
• Optimisation for four-stroke engines to give cleanliness and improved operation
• Excellent oxidation resistance and valve train-wear protection
• Seal compatibility
  
  PERFORMANCE PROFILE: API SN, SM, SL, SJ JASO MA2, JASO MA1, JASO MA
  Quantities required:
  • Cali 1100, Cali EV- 3.0l, V11 Sport, Daytona RS, 1100 Sport IE and Centauro - engine 3.5l
  
  
  See ENA41653 for a oil drain kit for your oil change.
  Please note this part CANNOT be posted outside of the UK mainland area.

   5 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]