HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA85433 and V-Twin Boost - ACA85001 or ACA85002.

Customer Kev fitted this combo and called us the next day to say that his V85TT was transformed; the fluffy throttle response between 2k and 3k was gone and the engine pulled better. Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 This part is due back in stock soon, call 01484 841395 to reserve yours

Air filter, flat paper cartridge type

See SIA85433 for a reusable K & N air filter

 5 in stock

AP8104329

Performance deCAT kit for EURO5 models containing a set of big bore header pipes and 2-1 connecting pipe (H pipe) without CAT. The big bore downpipes improve exhaust gas flow resulting in improved torque and power though the rev range. The dowpipes are 50% lighter than the originals and combined with the 2kg weight saving from the mid pipe you'll see a noticable weight saving. Also available with a CAT by special order - enquire for details. This kit will also improve the exhaust note but for optimum results combine with a Mistral performance silencer and air filter SIA85433. We also recommend fitting a V-Twin Boost plug-in FUA85001 with this CAT eliminator to enrichen the mixture

• CNC exhaust flanges included
• Significant weight saving
• Top spec AISI304 stainless steel (no rust!)
• Y piece is compatible with original heat shields and lambda probes
• Installation with graphite bushings to limit the transmission of vibrations
• Fixing bracket with antivibration silent block
• Straight through design for better performance and deeper sound
• Larger diameter internals for better exhaust gas flow
• Crossover is compatible with original system components
• Reduces engine operating temperature for better fuel consumption and efficiency
• Includes exhaust bushes (normal cost £30) and exhaust header gaskets
• Manufactured on the shores of Lake Como and developed using a rolling road

 This part is available by special order, request a quote

K&N high performance air filter, flat paper cartridge type

• High Air Flow with Excellent Filtration
• Designed to Increase Horsepower and Acceleration
• Washable and Reusable
• Will NOT Void Vehicle Warranty
• Lasts up to 50,000 miles before cleaning is required depending on driving conditions
• K&N Million Mile Limited Warranty�
• Emissions Legal
• Economical, a K&N Air Filter Will Last the Life of Your Bike
• Works with Original Equipment Manufacturer Vehicle Electronics
• Easy High Performance Add-on
• Environmentally Friendly

 1 in stock

AP8104329

Pipercross high performance air filter. Benefits of a Pipercross moulded panel motorcycle filter:

• 30-40% more air flow over your OEM paper filter
• Better for the environment (washable and reuseable)
• Improved fuel economy
• Lifetime warranty on manufacturing defects
• Handmade in the UK

Pipercross, based in the UK home of motorsport have over 30 years of road and track racing experience when it comes to filtration. Through this experience and engineering only the highest quality is achieved which is passed onto you through more power, torque, fuel economy & throttle response. Why settle for lesser filter brands which only have road experience when you can have quality proven on the track?

 Order now and we will post your order within 7 days.

AP8104329

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 This part is due back in stock soon, call 01484 841395 to reserve yours

Lower Throttle cable

This runs from the splitter to the carb. We advise you to measure your existing cable before ordering in case you have a non standard set up.

 5 in stock

 29117750 GU29117750 29 11 77 50
 2911 7750 2911.7750 29.11.77.50

Short lower throttle cable from splitter to carb

We advise you to measure your existing cable before ordering in case you have a non standard set up. Two cables required

 4 in stock

23117770-z 23117770 GU23117770 23 11 77 70
 2311 7770 2311.7770 23.11.77.70

Full workshop manual for mk 1 V7 Classic models covering maintenance, overhaul and detailed repair. Also relevant for other V7 mk 1 models with twin throttle bodies

Includes tolerances for many parts and a wiring diagram. n.b. These are comb bound reprints

 This part is due back in stock soon, call 01484 841395 to reserve yours

 981078 MG981078

Complete replacement Matris damper and spring assembly. This fork upgrade completely replaces your budget non-adjustable fork internals with a fully adjustable damper and spring. The spring is adjustable for preload and the damper has separate compression and rebound adjustment.

These shocks are an excellent suspension upgrade which will transform your V100. Fully adjustable damping and preload allows you to get your bike handling as it should.

• Fork cartridge cylinder 20 mm in Alu alloy, with lapping and oxidation surface treatment
• Pumping rod 12 mm in Alu alloy Al 7075, with lapping and hard oxidation surface treatment
• Set of Compression and Rebound valves, supported by oilless slide bearings, machined from Aluminium billet, with its own dedicated shims pack for a total hydraulic flows control
• Anti-cavitation valve sets.
• All internal and external Aluminium components are supplied with oxidation surface treatment.
• No modification to the original fork is required for assembly the fork kit and is completely overhauled for proper and regular maintenance.
• Supplied with specific oil (Motorex Fork Oil)

• Spring preload unit, with specific reference marks
• Rebound unit with specific clicks
• Compression unit with specific clicks

 This part is available by special order, request a quote