Page 13 of 33
Clip On Handlebars Tarozzi HAA11035 Fits V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3, V65, V35C,V50C, V65C, Lario, Monza 2, Imola 2, 850T, T3, T4, G5, Convert, 1000 SP, S3, Cali 2, Mille GT (series 1), V7 Special   Dimensions: For 35mm stanchions Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube 38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle and height, pull back angle is adjusted on the fork stanchion clamp. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar £149.00 INC VAT £124.17 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Hand Guard Kit HAA88250 Fits Stelvio, Breva 1100, Breva 1200, 1200 Sport ALL, Griso ALL  Pair of black ABS handguards with fitting hardware, these protect clutch and brake levers from damage as well as providing some weather protection for your hands. Supplied as a pair with bar end weights, bar end plugs (only for Stelvio), fitting information, spacers, bolts and washers. Guzzi part ref. 883253 + 883254 983157 MG983157 £97.00 INC VAT £80.83 EX VAT  This item is normally back in stock within 1-3 weeks, if you need it more quickly please call us on 01484 841395 or request a quote. If you would like to be emailed once this item is available again then email us Please call or enquire to check availability of this part Mistral Stainless Steel Reverse Cone Black Silencer EXA38269 Fits Griso ALL  Hand made to order in Italy Reverse cone black stainless steel Mistral performance silencer in a special brushed black finish with polished end cap. This is a high quality, lighter and better sounding alternative to the original silencer This quality road legal silencer with removable DB killer is significantly lighter than stock and improves exhaust note, BHP and torque. As used on our bikes
Now supplied with subtle laser etched logo rather than badge No remap required Release the music in your Guzzi!
Not what you're looking for? We can supply a range of silencer shapes and finishes for your model - contact us with your requirements and we'll advise on availability and price £395.00 INC VAT £329.17 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Performance Air Filter K & N SIA28367 Fits Le Mans 1000, Cali 3, Strada 750, Spada 3, 1000S, Lario, Imola 2, Monza 2, V75 4 Valve    Dimensions: 150mm x 110mm x 47mm K&N high performance air filter - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty®
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
28113660-z 28113660 GU28113660 28 11 36 60 2811 3660 2811.3660 28.11.36.60 £49.40 INC VAT £41.17 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Individual Performance Air Filter K & N SIA30362 Fits Daytona, Cali 1100 (1994-1997), Cali EV (1997-2005), V11 Sport, Cali Stone, Cali Jackal, Centauro, Quota ALL, 1100 Sport ALL,    Dimensions: 58mm ID to fit throttle body or inlet trumpet K&N high performance air filter, fit to throttle body or inlet trumpet as part of performance tuning Best results will be obtained when combined with a Mistral crossover, silencers and Power Commander - High Air Flow with Excellent Filtration
- Designed to Increase Horsepower and Acceleration
- Washable and Reusable
- Will NOT Void Vehicle Warranty
- Lasts up to 50,000 miles before cleaning is required depending on driving conditions
- K&N Million Mile Limited Warranty
- Emissions Legal
- Economical, a K&N Air Filter Will Last the Life of Your Bike
- Works with Original Equipment Manufacturer Vehicle Electronics
- Easy High Performance Add-on
- Environmentally Friendly
Two filters required per bike. £53.60 INC VAT £44.67 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part M12 Engine Mounting Bolt Kit Front Stainless Steel SSA14450 Fits V7 Sport, S3, 750S, 850/1000 ALL Models, Cali 1100, Cali EV, Cali Vintage  Stainless steel front engine mounting bolt kit made specially for Gutsibits. Kit contains one long engine M12 x 1.25 bolt, one M12 half nut, one M12 crinkle washer and two standard M12 washers - all in A2 stainless steel Made especially for Gutsibits the original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505 14429500-z 14429500 GU14429500 14 42 95 00 1442 9500 1442.9500 14.42.95.00 £31.00 INC VAT £25.83 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one week of your order Please call or enquire to check availability of this part Fork Brace Tarozzi SUA66651A Fits 1000 SP, G5   Dimensions: 56mm slider diameter, 195mm between stanchion centres Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes. £110.00 INC VAT £91.67 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Fork Brace Tarozzi SUA66651B Fits Le Mans 2, CX100   Dimensions: 56mm slider diameter, 195mm between stanchion centres Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes. £110.00 INC VAT £91.67 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Fork Brace Tarozzi SUA66651C Fits T3, T4, Convert, G5   Dimensions: 55mm slider diameter, 195mm between stanchion centres Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes. £110.00 INC VAT £91.67 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Fork Brace Tarozzi SUA66651H Fits V7 Sport   Dimensions: 55mm slider diameter, 180mm between stanchion centres Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes. £110.00 INC VAT £91.67 EX VAT  This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or request a quote. It is normally available within one to three weeks of your order Please call or enquire to check availability of this part Page 13 of 33
|