Page 5 of 31
Sort by Title    | Sort by Price |
Fits Moto Guzzi V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3, V65, V35C,V50C, V65C, Lario, Monza 2, Imola 2, 850T, T3, T4, G5, Convert, 1000 SP, S3, Cali 2, Mille GT (series 1), V7 Special 
Clip On Handlebars Tarozzi
HAA11035 | £141.80 INC VAT£118.17 EX VAT |  | Pair of adjustable Tarozzi clipons, quality aluminium castings and chrome plated tube 38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle and height, pull back angle is adjusted on the fork stanchion clamp. Note that these cannot be used with a standard PS 12 master cylinder as there is insufficient clearance against the handlebar |  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 35mm stanchions | | |
|
Fits Moto Guzzi V50 I, V50 II, V50 3, V35 I, V35 II, Imola, Monza
Clip On Handlebars Tommaselli
HAA11032 | £152.20 INC VAT£126.83 EX VAT |  | Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube 38mm rise, these clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder fitted to small twins unless the master cylinder is modified.
Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors. | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 32mm stanchions, 223mm usable handlebar | | |
|
Fits Moto Guzzi V7 Sport, 750S, Le Mans 1, Le Mans 2, Le Mans 3, V65, V35C,V50C, V65C, Lario, Monza 2, Imola 2, 850T, T3, T4, G5, Convert, 1000 SP, S3, Cali 2, Mille GT (Series 1)
Clip On Handlebars Tommaselli
HAA11135 | £152.20 INC VAT£126.83 EX VAT | | Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder.
Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors. | | quantityadd to basket
| Dimensions: For 35mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp 1 in stock | | |
|
Fits Moto Guzzi Spada 3, Cali 3, Le Mans 1000, Mille GT (1990-1993), V7 ALL, V7 II ALL
Clip On Handlebars Tommaselli
HAA11140 | £152.20 INC VAT£126.83 EX VAT | | Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder unless the master cylinder is modified.
Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors. | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 40mm stanchions, 223mm usable handlebar | | |
|
Fits Moto Guzzi V35 GT, V65 GT, V65 Florida, V75 4 Valve, Nevada 350 (1994-1999), Nevada 750 (1991-2001), 750 Targa, Strada 750, 750T, SP II, T5
Clip On Handlebars Tommaselli
HAA11138 | £152.20 INC VAT£126.83 EX VAT | | Pair of adjustable Tommaselli clipons, quality aluminium castings and chrome plated tube These clip ons pivot on the central bolt to adjust the handlebar angle, pull back angle is adjusted on the fork stanchion clamp. These clip ons are unsuitable for use with the PS12 handlebar master cylinder.
Bar ends are held in by a rivet and some modification will be needed if you wish to fit bar end mirrors. | | Sorry this item is not currently available from our suppliers. We may have an alternative part or replacement, please call us on +44 (0) 1484 841395 or email us to find out more
| Dimensions: For 38mm stanchions, 223mm usable handlebar, 75mm total height, 30mm tall stanchion clamp | | |
|
Fits Moto Guzzi T3, T4, Le Mans 2, G5, Convert, 1000 SP, SP II, 850T
Clock Surround Kit Polished Aluminium Drilled Mount with Ignition Switch Hole
ACA01001 | £157.00 INC VAT£130.83 EX VAT | 
 | Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:- Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
- 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
- Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
- Polished aluminium instrument backs (attach with existing nuts)
Bolts to handlebar clamps, see ACA01002 for this part without drillings for the handlebar clamps Manufactured from 6mm aluminium, this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated.
Note that on models with an electronic tacho (e.g. Cali 3) the stud hole spacing may be a few mm out and you will needto drill new stud holes in the rear of the surround | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 6mm thick aluminium, 70mm centres on M8 mounting holes, for 48mm deep instruments with 60mm stud centres | | |
|
Universal Part: Clock Surround Kit Polished Aluminium Plain Mount with Ignition Switch Hole
ACA01002 | £157.00 INC VAT£130.83 EX VAT | 
 | Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:- Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
- 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
- Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
- Polished aluminium instrument backs (attach with existing nuts)
Supplied ready for you to drill your own mounting holes to suit your project, see ACA01001 if you would prefer a ready to mount kit for T3, Le Mans 2 etc... Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments and ignition switch shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB This kit works with the ignition switch ELA17735, later type switches will not fit into the predrilled ignition switch hole. On models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 6mm thick aluminium, 48mm deep instruments with 60mm stud centres | | |
|
Universal Part: Clock Surround Kit Polished Aluminium Plain Mount without Ignition Switch Hole
ACA01003 | £157.00 INC VAT£130.83 EX VAT | 
 | Polished aluminium instrument console kit for 80mm instruments (as used on Le Mans 1, 2, T3, V50 etc...). This high quality kit is specially made for Gutsibits and consists of the following parts:- Polished aluminium clock surround front with 80mm holes for instruments, slotted ignition switch hole and 8mm instrument light holes
- 6 LEDs with chrome bezels (small spade connectors to rear) for indicators, oil, charge system, neutral and high beam warning light
- Polished aluminium instrument surrounds (odometer surround includes hole for reset knob)
- Polished aluminium instrument backs (attach with existing nuts)
Supplied ready for you to drill your own mounting holes to suit your project, see ACA01001 if you would prefer a ready to mount kit for T3, Le Mans 2 etc... Manufactured from 6mm aluminium, this this instrument binnacle will not fatigue with use and is an excellent way to present the standard 80mm Veglia instruments. Bolts to handlebar yoke clamps. NB instruments shown in photo for illustration purposes only.
This is a high quality UK manufactured part made exclusively for Gutsibits, do not confuse with lesser alternatives. These kits are often prepared to order so please allow for a couple of days delay before your order is sent.
NB on models with cable operated remote odometer resets the reset knob will need to be relocated. Check the depth of your instruments before ordering, this kit is intended for 48mm deep instruments with 60mm stud centres
Instruments with 60 degree or similar angle drives to the rear will require you to enlarge cable cutouts in the plates that make up the rear of the kit | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: 6mm thick aluminium, 48mm deep instruments with 60mm stud centres | | |
|
Page 5 of 31
|
Secure online shopping with SagePay 
