Shop headings: New Spares | Used Spares | Accessories | Brands
Clamp on retro style bar end mirror CNC manufactured in aluminium and finished in black, these are a high quality and stylish addition to your Guzzi and much better value than the genuine Guzzi mirrors. Classic oval shape can be flipped for fitting on either side and above or below the handlebars.
The Reverse Retro mirror is made from billet aluminum. Compact, classy and unmistakable design. Simple lines make it a sought-after Classic suitable for a range of styles. The adjustment system and anti-dazzle glass guarantee optimal versatility and comfort.
Requires 13mm on the handlebar to accommodate the mounting, with optional bar end pieces HAA00113 available to extend bars if required. You may need to redrill the locating holes in your handlebars if moving your switchgear 13mm inboard if HAA00113 is not fitted
Perfect for that classic cafe racer look
This part is available by special order, request a quote
£115.00
INC VAT
£95.83 EX VAT
Pair of stylish Kappa soft panniers, perfect for V7 and V9 models.
Order now and we will post your order within 7 days.
£168.00
INC VAT
£140.00 EX VAT
This handlebar riser kit moves the handlebars up by 35mm resulting in much improved comfort. Finished in silver, this is a high quality Italian engineered kit. For yokes with 32-35mm clamp bolt centres
Kit contains fitting instructions, zinc finish bolts, bolt head plugs and risers. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit
This part is due back in stock soon, call 01484 841395 to reserve yours
£45.00
INC VAT
£37.50 EX VAT
Stainless steel front engine mounting stud kit. Kit contains one long engine M12 x 1.25 threaded stud (with plain section in centre), two M12 half nuts, two M12 crinkle washers and four standard M12 washers - all in A2 stainless steel
The original bolts are prone to seizing in place so we recommend replacing with this quality stainless part. Also known as Guzzi ref. 03429500, 14429505
Differs from original part whcih is a bolt, this stud make is easier to fine tune the position of the stud between header pipes
This part is available by special order, request a quote
14429500 GU14429500 14 42 95 00
1442 9500 1442.9500 14.42.95.00
£26.00
INC VAT
£21.67 EX VAT
Universal rack for mounting H & B top cases to luggage racks which don't have the H & B fitting. Includes grab rail, finished in black.
Because this is a universal rack you may need to do some additional drilling and obtain extra fasteners depending upon which type of luggage rack you are fitting this to
This part is available by special order, request a quote
£82.00
INC VAT
£68.33 EX VAT
Pair of triangular side panels with fixings to fit all Tonti frame models with slotted side panel lugs under the seat
This is a kit, the fixings need bending and glueing to the sidepanel before the side panels can be fitted. The panels are GRP, fitting instructions are provided in German
This part is available by special order, request a quote
£105.00
INC VAT
£87.50 EX VAT
Complete single disc clutch kit for 5 speed big twins containing flywheel, new deep spline clutch hub, friction plate, spring plate, pressure plate, and flywheel bolts. Suitable for all big twins with either distributor or crankshaft mounted ignition system, not suitable for Digiplex equipped models.
This clutch upgrade has the following advanges over the old two plate clutch:
This part is due back in stock soon, call 01484 841395 to reserve yours
£520.00
INC VAT
£433.33 EX VAT
Prolong battery life with this 9 stage smart battery charger, suitable for 6v, 12v AGM and lead acid batteries.
Weatherproof - suitable for use outside 6V / 12V 1A Auto-sensing charger. Suits all AGM, Lead Acid, Calcium and Gel batteries Charges 6v and 12v batteries Ring terminal and alligator clip harnesses included Spark proof Maintains full charge Simple, connect and wait for green light Overload / Short circuit protection See ACA96001 for a spare set of charging leads (e.g. for a separate bike).
This part is due back in stock soon, call 01484 841395 to reserve yours
£57.00
INC VAT
£47.50 EX VAT
Polished aluminium blanking plate kit, use when fitting a crankshaft mounted ignition to replace the distributor
Includes O ring and two countersunk screws. See ENA90313 for replacement O ring
This part is due back in stock soon, call 01484 841395 to reserve yours
£17.00
INC VAT
£14.17 EX VAT
Complete sump kit which moves the oil filter out from within the sump to a recess under the sump. This simplifies and speeds up oil changes because the sump no longer needs to be removed. Oil cooling is also improved because oil will cool through the body of the filter. The complete sump kit is a simple fit that will speed up oil changes and reduce the risk of stripping crankcase bolts through repeated sump removal. It is very similar to the arrangement on modern CARC models. Replaces sump extension ENA14002. Finished in silver this is a great upgrade for your Guzzi. Uses oil filter SIA14530
Depending on model you may need a longer dipstick e.g. ENA28495. You can calibrate the sump by adding 3l of oil and marking the position on the dipstick. Note that you need to transfer your oil pressure relief valve and the intake screen from your existing sump into this new one. Note also that the stamped steel covers on some oil pressure relief valves flare wider than others so you may need to make a little clearance in order to get the threads started. Also available at additional cost in black by special order - ENA14006
This part is available by special order, request a quote
£450.00
INC VAT
£375.00 EX VAT