Shop headings: New Spares | Used Spares | Accessories | Brands
90 Results - Page 4 of 9
Piston for oil pressure relief valve in lower crankcase
This part is due back in stock soon, call 01484 841395 to reserve yours
31150950 GU31150950 31 15 09 50
3115 0950 3115.0950 31.15.09.50
£12.00
INC VAT
£10.00 EX VAT
Brembo P2 F08 brake caliper piston kit, contains 2 Brembo (P08/P8) coated aluminium pistons
A worthwhile upgrade for earlier twin bleed P08/F08 calipers with steel pistons, seal kits available seperately - BRA37234. Brembo part no. 120225220. Ducati ref. 079739752
This part is due back in stock soon, call 01484 841395 to reserve yours
Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ251 (early models only), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)
£35.00
INC VAT
£29.17 EX VAT
Pair of replacement anodised alloy pistons for Brembo F05 (P5) calipers. These also fit Grimeca calipers with 32mm pistons
Also used on some Laverdas. BRA19301 for alternative part in stainless steel
This part is due back in stock soon, call 01484 841395 to reserve yours
19652300 GU19652300 19 65 23 00
1965 2300 1965.2300 19.65.23.00
Also fits Benelli 250 TS, Ducati Pantah 500SL
£31.80
INC VAT
£26.50 EX VAT
Piston ring compressing tool, compresses piston rings to fit into bore. Without this tool you risk snapping piston rings, the tool also speeds up the fitting of new rings
For 57mm - 125mm bores, supplied with hex key for bore adjustment. Not suitable for CARC models
This part is available by special order, request a quote
£48.00
INC VAT
£40.00 EX VAT
Single replacement caliper piston for Brembo P2 F09 or P9 caliper as fitted to Spada rear.
NB you will require a pair of these. Also used on Benelli Sei rear. Corresponding caliper seal kit is BRA54722
2 in stock
20391310 GU20391310 20 39 13 10
2039 1310 2039.1310 20.39.13.10
Also fits Benelli 900 Sei Rear (1983), Laverda 1000 RGS Fronts (1984)
£20.00
INC VAT
£16.67 EX VAT
Piston ring set for 1 piston, only for models equipped with Gilardoni piston and barrel sets
Oil ring is 4mm high
This part is available by special order, request a quote
£35.00
INC VAT
£29.17 EX VAT
Standard (lower) compression 88mm piston kit containing aluminium piston, gudgeon pin, circlips and piston ring set
Sorry, this part is no longer available.
28060400 GU28060400 28 06 04 00
2806 0400 2806.0400 28.06.04.00
Sorry this item is out of production
Standard (lower) compression 83mm piston kit containing aluminium piston, gudgeon pin, circlips and piston ring set
Sorry, this part is no longer available.
17060451 GU17060451 17 06 04 51
1706 0451 1706.0451 17.06.04.51
Sorry this item is out of production
Dimensions:
82.5mm bore
Complete 750cc piston and Nikasil coated barrel kit including gudgeon pin, piston rings and circlips for one cylinder
Availability varies on this part, check availability
£380.00
INC VAT
£316.67 EX VAT
High compression 88mm piston kit containing aluminium piston, gudgeon pin, circlips and piston ring set. Combine with 88mm barrels to increase capacity and performance of Le Mans 1, Le Mans 2 and Le Mans 3 models. This kit can also be fitted to low compression 88mm models (e.g. 1000 SP) to increase performance
Dome Height Approx. 6.5mm
2 in stock
28060450 GU28060450 28 06 04 50
2806 0450 2806.0450 28.06.04.50
£115.80
INC VAT
£96.50 EX VAT