Shop headings: New Spares | Used Spares | Accessories | Brands
90 Results - Page 8 of 9
Profesionally rebuilt Brembo PS 15 rear master cylinder for models with a remote reservoir. Mounting holes at 50mm centres.
Brembo ref. 10.2934.02
Usually supplied as a bare master cylinder with a piston installed. Spring, operating lever and input elbow may not be included. See BRA19500 for the elbow that the fluid supply pipe fits on to and BRA19667 for the return spring. Send us your old rebuildable (i.e. with a undamaged bore) PS15 for a £10 credit against your next order.
19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00
£80.00
INC VAT
£66.67 EX VAT
Complete twin bleed F09 (P9) front right hand (when mounted behind fork leg, otherwise use as LH) replica Brembo brake caliper. Supplied with bleed nipples, dust cover, pins and spring. This can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
Brake pads not included- see BRA33204
This part is available by special order, request a quote
£145.00
INC VAT
£120.83 EX VAT
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which is no longer available. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Type with pivot bolt HAA10850
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
We need to check whether we have stock of this part, check availability
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
Prices from
£48.00 - £88.20
inc VAT dependent on condition
Brembo PS 16 handlebar mounted front master cylinder. This replaces the PS 15 handlebar mounted master cylinder which was unavailable for many years. The PS16 has a small rectangular fluid reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')
Supplied complete with lever and brake lever switch. Uses lever BRA28657 or BRA30605. Also known as Guzzi ref. 28660178. Can be used to replace round PS15 master cylinder BRA07338 and the discontinued PS16 Guzzi ref. 978606
This part is available by special order, request a quote
30660125 GU30660125 30 66 01 25
3066 0125 3066.0125 30.66.01.25
£225.00
INC VAT
£187.50 EX VAT
High quality rear Hagon Mono Shock built to your rider weight and riding style. 38mm Stainless steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Black powder coated spring, fully progressive spring pre-load adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments.
All Hagon shocks have a 2 year unlimited kilometer guarantee and are TUV approved
This part is available by special order, request a quote
£410.00
INC VAT
£341.67 EX VAT
Complete twin bleed F09 (P9) front left hand (when mounted behind fork leg, otherwise use as RH) replica Brembo brake caliper. Also rear caliper (when mounted above and behind rear wheel spindle).
This can replace the P9 rear caliper as fitted to a 1000 SP, or can be used as a performance upgrade to replace the smaller piston P8 caliper fitted as standard to many Guzzis. Please see Guzziology for advice on how to perform this conversion.
See BRA33204 for brake pads
Sorry this part cannot be shipped to the US or Canada
6 month warranty on this part
1 in stock, request a quote
Prices from
£60.00 - £120.00
inc VAT dependent on condition
High quality rear shock with remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee.
This part is available by special order, request a quote
£590.00
INC VAT
£491.67 EX VAT
High quality rear shock with remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee.
This part is available by special order, request a quote
£590.00
INC VAT
£491.67 EX VAT
High quality rear shock with remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee.
This part is due back in stock soon, call 01484 841395 to reserve yours
886201 MG886201
£590.00
INC VAT
£491.67 EX VAT
High quality rear shock without remote hydraulic pre-load adjuster, 38mm gold zinc plated steel damper unit fully re-buildable, 18mm piston rod, wide ranging single circuit progressive damping adjustment with automatic compression / rebound balance. Red powder coated spring, hydraulic spring pre-load adjuster giving 1cm of adjustment. Supplied complete with end mounting bushes / bearings, tools and instructions for spring and damping adjustments. 2-year guarantee.
This part is available by special order, request a quote
05550230 GU05550230 05 55 02 30
0555 0230 0555.0230 05.55.02.30
£450.00
INC VAT
£375.00 EX VAT