Rebuild kit for Brembo PS 13 handlebar mounted brake and clutch master cylinders, includes all seals, return spring and brake grease. Piston is hollow

This seal kit is for Cali 1100 master cylinders with a hollow pivot pin, does not fit early models with a solid pivot pin. For Cali EV models this only fits master cylinders with a pair of screws in the middle of the cap, it does not fit the later master cylinder which has diagonally opposed screws. Also know as Guzzi ref. 28659378, 000043851, 30659330. NB Included instructions may refer to rear master cylinder applications rather than front. Brembo ref. 110436250

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Cagiva Elefant E750, Ducati 748

Engine Bottom End. Doesn't include pistons, barrels, engine head. Engine Turns over. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair. Can be supplied as part of a engine kit package for project bikes, Triking, JZR or Pembleton three wheelers, call us to discuss.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 We need to check whether we have stock of this part, check availability

PX00700

2 valve engine with flywheel included. Engine Turns Over. Includes 1 conrod and no pistons. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

PE021776

Rebuild kit for Brembo Radial Calipers with 34mm pistons fitted to the front of these models. Contains seals, brake grease, washers, bleed screw and dust cap. One kit required per caliper.

Caliper seal kit

 This part is available by special order, request a quote

Engine bottom end doesn't include Pistons , barrels, Engine Head or flywheel. Engine Turns over. Supplied without charging or ignition system. Mileage unknown (likely less than 30k miles).

Collection only, spares or repair.

Sorry this part cannot be shipped to the US or Canada

6 month warranty on this part

 1 in stock, request a quote

PX0021

Brembo brake master cylinder overhaul kit for handlebar, undertank (cable operated) mounted, handlebar mounted and rear PS 12 master cylinders. Contains seals, brake grease, spring and piston. PS12 handlebar master cylinder fitted to early 850 and 1000 models. PS12 rear master cylinder fitted to Nevada 750

This seal kit is also known as 082039797. NB repair kit instructions refer to rear master cylinder. To fit this to a PS12 handlebar mounted cylinder you will need to punch the old piston out using a thin drift through the hole at the banjo bolt end of the master cylinder. Carefully note the order of the ring and washer as the piston comes out and replace with components from kit. Brembo no. 110279720. See this link for help with fitting this kit

 4 in stock

 17659352 GU17659352 17 65 93 52
 1765 9352 1765.9352 17.65.93.52

Also fits Ducati 500 SL Pantah, Ducati 350/500 Twin GTV, Ducati 350/500 SL Pantah, Benelli 500 Quattro, Benelli 504 Sport, Benelli 250 2C, Benelli 900 Sei, Laverda Montjuic, Harris F1

Rebuild kit for Brembo Goldline Calipers with 34mm / 30mm pistons. Contains seals, brake grease and instructions in English. One kit required per caliper. Also suitable for some Ducati / Aprilia models.

Caliper seal kit

 2 in stock

Kit containing 5 Litres of Pistoneeze SAE20W-50 mineral engine oil and 1 litre of Extreme Pressure gearbox and drivebox oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil

Please note this kit CANNOT be posted outside of the UK mainland area.

 3 in stock

Kit containing 2 Litres of Millers Pistoneeze SAE20-50 mineral engine oil, 1 litre of Extreme Pressure gearbox oil and 1 litre of final drive oil. This kit contains all the oil you will need to change your engine, drive box and gearbox oil

See TOA19001 for a inexpensive tool to loosen and tighten the dipstick
Please note this kit CANNOT be posted outside of the UK mainland area

 4 in stock

Brembo type PS 15 handlebar mounted front master cylinder with plastic reservoir. Use this master cylinder if you are de-linking your brakes to ensure the correct piston operating ratio (if you retain the original PS12 or PS13 your front brakes are likely to feel 'spongy')

Use brake lever BRA14605 or BRA17606 for this master cylinder. See BRA30125 for replacement part

 This part is due back in stock soon, call 01484 841395 to reserve yours

Also fits Ducati 600 SL Pantah, Ducati 750/900 SS, Ducati 860/900 GTS, Ducati 900 Darmah, Ducati 900 MHR, Ducati 1000 MHR, Ducati 350 Vento/Forza (1977-1985), Ducati 450 Desmo, Laverda, Hesketh