Pair of chromed Hepco and Becker pannier rails for Hepco and Becker panniers

Pair pannier racks

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote

Tough Xplorer top box / top case to match Hepco and Becker Xplorer panniers, ideal for enduro touring. Extremely endurable combination of black anodised aluminium sheet and coloured shock-resistant plastic.

• Completely waterproof thanks to special seals
• Made of 1.5 mm thick plate aluminum and highly
impact-resistant plastic molding
• Absorbs impacts and ground contact
• Stable metal locks, integrated carrying handles
• Case and top case available with simultaneous
locking (please specify when ordering)
• Takes a full-face helmet
• Innovative side hinged design
• Fits all H&B rear racks and aluminum racks

 This part is available by special order, request a quote

Chrome luggage rack and sissybar with backrest

Supplied with fixings, this rack is compatible with Hepco and Becker top boxes

 This part is available by special order, request a quote

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165

 This part is available by special order, request a quote

Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with 12 volt 3 Ohm coils ELA14500 (big twins) and can be used to replace Digiplex on models with Ducati charging systems where the bike is converted to carburettors. This kit is just an ignition system, it will not control fuelling. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.

2 year warranty on Sachse ignition kits

Once fitted no further adjustment should be necessary. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. See this link for fitting instructions. Some bikes may need at least one additional spacer to allow enough clearance for alternator cover to fit once pickup is fitted. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA14500

 This part is available by special order, request a quote

The Power Commander is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The Power Commander uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the Power Commander's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the Power Commander returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.

This is for V7 models with twin throttle bodies, it is not compatible with single throttle body models

 This part is available by special order, request a quote

Pair of black 30 litre Junior panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers. These panniers are compatible with the frames used for Hepco Classic panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]

Pair of polished slash cut Mistral performance silencers with removable baffles, these are a high quality, durable and better sounding alternative to the original silencers

Handmade to order in Italy
Also available in a satin finish
Release the music in your Guzzi!

Not what you are looking for? Reverse cone silencers also available by special order for this model

 This part is available by special order, request a quote

Pair of black 40 litre Junior panniers to fit Hepco and Becker pannier frames (fitted as OE to many models). These are the classic Hepco and Becker pannier design.

• Unbreakable, special double walled shell made of impact resistant plastic which absorbs bumps and falls
• Completely waterproof thanks to special seals
• Fitted with rugged metal locks and an ergonomic carry handle
• Aerodynamic design
• Inner bags and accessories available

These are a great value pannier set which are quickly and securely fitted to any Moto Guzzi using Hepco pannier rails (available from Gutsibits). Their discreet and classic styling looks right on any Guzzi from the 1970's to the present day. Supplied with aluminium lock adapter plates and two lock keys. A crash helmet will fit in these 40 litre panniers. See LUA70129 and LUA70128 for Guzzi badges to fit these panniers. These panniers are compatible with the frames used for Hepco Classic panniers

 This part is available by special order, request a quote

[ CLOSE WINDOW ]
[ CLOSE WINDOW ]