| Page 9 of 9
PS15 Rear Master Cylinder With Reservoir BRA10802 Fits 1000 SP, SP II, Spada 3, Convert, G5, T3, T4, Le Mans 1, Le Mans 2, Le Mans 3, Cali 3, Cali 2, Cali 1100 (1994-1997), Mille GT  PS 15 rear master cylinder with plastic reservoir Brembo no. 10.2426.00. Replaces original part with cast reservoir which is no longer available. Also replaces guzzi ref. 29667000. Please note that reservoir is slightly taller than the original, and you may need swap the operating arm from your old master cylinder if this is a different type.
This part can be used instead BRC19001 but you will also need to fit a brake reservoir  3 in stock 10438802 GU10438802 10 43 88 02
1043 8802 1043.8802 10.43.88.02 
Sorry this item is out of production
RH Breather Pipe ENA83499 Fits Norge (4v/Cyl), 1200 Sport (4v/Cyl) Pipe attached to breather box  This part is due back in stock soon, call 01484 841395 to reserve yours
If you would like to be emailed once this item is available again then click here 883499 MG883499 £79.00 INC VAT £65.83 EX VAT LH Breather Pipe ENA83500 Fits Norge (4v/Cyl), 1200 Sport (4v/Cyl) Pipe attached to breather box This part is due back in stock soon, call 01484 841395 to reserve yours If you would like to be emailed once this item is available again then click here 883500 MG883500 £79.00 INC VAT £65.83 EX VAT Gasket Timing Cover ENA88700 Fits V7 Special, V7 Racer, V7 II ALL, V7 III ALL, V9 ALL, V85TT, V7 850 Timing cover gasket Gasket for timing chest This part is due back in stock soon, call 01484 841395 to reserve yours If you would like to be emailed once this item is available again then click here 887003 MG887003 £15.00 INC VAT £12.50 EX VAT Oil Filter UFI 2314900 SIA14530 Fits 125 2C, 250 TS, S3, 850/1000 ALL Models, Daytona 1000 Cartridge oil filter UFI 23 149 00 Fits Daytona 1000 models where filter screws into base of sump. This is an 8 sided UFI filter.
Use tool TOA41006 if your filter is located inside the sump, use tool TOA01201 if you change your oil filter without removing the sump.
You may also require SIA10070 which is the crush washer for the drain plug and ENA14036 (sump gasket).
Please note that Daytona RS and T5 Polizia use filter SIA15300 More than 5 in stock 14153000 GU14153000 14 15 30 00
1415 3000 1415.3000 14.15.30.00 Dimensions:
For 16mm threaded spigot £10.00 INC VAT £8.33 EX VAT
Air Filter SIA10432 Fits Cali 1400, Griso 850, Griso 1100, Griso 1200, Stelvio, V85TT Air filter, flat paper cartridge type See SIA10433 for a reusable K & N air filter 4 in stock AP8104329 Dimensions:
180mm x 125mm x 38mm £11.00 INC VAT £9.17 EX VAT
Mirror Clamp ACA15010 Fits V7 700, V7 Special, 850 GT ALL Polished alloy handlebar mirror clamp for M10 mirror, fits all M10 Guzzi mirrors sold by Gutsibits. Ideal for models which did not originally have mirrors, or where you are replacing fairing mounted mirrors Universal mirror mount for all models with European 22mm (7/8") OD handlebars 1 in stock Dimensions:
M10 conventional thread £11.95 INC VAT £9.96 EX VAT
Mistral Performance Downpipe and Link Pipe Kit Euro 5 WITH CAT EXA85628 Fits V85TT (EURO 5)
- No remapping required
- CNC exhaust flanges included
- Significant weight saving
- Top spec AISI304 stainless steel (no rust!)
- Y piece is compatible with original heat shields and lambda probes
- Installation with graphite bushings to limit the transmission of vibrations
- Fixing bracket with antivibration silent block
- Straight through design for better performance and deeper sound
- Larger diameter internals for better exhaust gas flow
- Crossover is compatible with original system components
- Reduces engine operating temperature for better fuel consumption and efficiency
- Includes exhaust flanges, exhaust bushes (normal cost £30) and exhaust header gaskets
- Manufactured on the shores of Lake Como and developed using a rolling road
 This part is available by special order, request a quote
£765.00 INC VAT £637.50 EX VAT Mistral Performance Downpipe and Link Pipe Kit Euro 5+ EXA85859 Fits V85TT (Euro 5+)    Increased Header Pipes + Crossover Y KIT specific for Moto Guzzi V85 TT EURO5+.
Technical ad constructive characteristic of our kit make it the best product that you will find for your V85 TT!
Increased Header Pipes technical features:
Completely made of stainless steel with surface finish like the original one
Increased diameter: the increase in internal volume guarantees more torque and power at all revs
CNC flanges completely machined from solid
Reduced weight: -50% weight compared to the original collectors
Predisposition for mounting original heat shields and lambda probes in their original position
Specific gaskets between header pipes and cylinder head included in the kit
Crossover Y technical features:
Completely made of stainless steel with surface finish like the original one
Installation with graphite bushings to limit the transmission of vibrations
Fixing bracket equipped with anti-vibration silent-block
Direct internal structure: better performance and darker sound
Increased diameters: better exhaust gas flow
Lower weight: -50% less weight
It reduces the operating temperature of the engine in favor of better consumption and efficiency
Predisposition for the original lambda probe
Compatible with original exhaust and Mistral exhaust.
Artisan product: quality and attention to every detail. Assembly, welding and finishing operations are exclusively handmade. This part is available by special order, request a quote £785.00 INC VAT £654.17 EX VAT Mistral Performance Downpipe and Link Pipe Kit Euro 5 EXA85629 Fits V85TT (EURO5)
- No remapping required
- CNC exhaust flanges included
- Significant weight saving
- Top spec AISI304 stainless steel (no rust!)
- Y piece is compatible with original heat shields and lambda probes
- Installation with graphite bushings to limit the transmission of vibrations
- Fixing bracket with antivibration silent block
- Straight through design for better performance and deeper sound
- Larger diameter internals for better exhaust gas flow
- Crossover is compatible with original system components
- Reduces engine operating temperature for better fuel consumption and efficiency
- Includes exhaust flanges, exhaust bushes (normal cost £30) and exhaust header gaskets
- Manufactured on the shores of Lake Como and developed using a rolling road
We can also supply a version with a catalytic converter by special order, please contact us to order 1 in stock £745.00 INC VAT £620.83 EX VAT
|
Secure online shopping 
