Shop headings: New Spares | Used Spares | Accessories | Brands
This section contains switches, sensors, relays and other electrical items
Discontinued by Bosch, superceded to 97729R. Also see ELA05731 for new replacement part or ELC05730 for reconditioned alternative
This part is available by special order, request a quote
05730730 GU05730730 05 73 07 30
0573 0730 0573.0730 05.73.07.30
£700.00
INC VAT
£583.33 EX VAT
The Power Commander is a fuel injection and ignition timing (on some models) adjustment unit that plugs "inline" with the bikes' stock ECU. The Power Commander uses original equipment style connectors so that no splicing or cutting of the harness is required. Most installations take less than 15 minutes, some as little as 5 minutes. Changes are made to the bikes fuel and ignition curves via the Power Commander's onboard microprocessor. Using this technology we are able to offer a large area of adjustment without making any permanent changes to the bikes' ECU (electronic control unit). Removing the Power Commander returns the bike to its previous stock condition. The Power Commander can be ordered preprogrammed with a your choice of several settings, based on the modifications to your bike. The unit also comes complete with software and cable link that allows you to change between different maps or make adjustments to a map file.
This is for V7 models with twin throttle bodies, it is not compatible with single throttle body models
This part is available by special order, request a quote
£455.00
INC VAT
£379.17 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with standard 3 Ohm 12 volt coils and can be used to replace points or Motoplat ignition on models with Saprisa charging systems. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Eliminates vague timing due to worn distributors on big twins. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. Once fitted no further adjustment should be necessary. See this link for fitting instructions. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA31165
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Complete electronic ignition kit containing alternator mounted ignition pickup, fittings and amplifier unit. Works with 12 volt 3 Ohm coils ELA14500 (big twins) and can be used to replace Digiplex on models with Ducati charging systems where the bike is converted to carburettors. This kit is just an ignition system, it will not control fuelling. The pickups for this kit are mounted on the alternator stator. Supplied with instructions in German with wiring diagrams.
2 year warranty on Sachse ignition kits
Once fitted no further adjustment should be necessary. Preloaded with nine ignition curves, two of which are designed for twin plugged bikes. See this link for fitting instructions. Some bikes may need at least one additional spacer to allow enough clearance for alternator cover to fit once pickup is fitted. Note that if you are replacing a Digiplex system you will also need to replace your 'square' coils with higher impedance 12 volt coils e.g. ELA14500
This part is available by special order, request a quote
£395.00
INC VAT
£329.17 EX VAT
Ducati regulator rectifier for models fitted with the Ducati charging system
Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black male bullet, 1 x red male bullet. See ELA28739 for a less expensive alternative
This part is due back in stock soon, call 01484 841395 to reserve yours
37703805-z 37703805 GU37703805 37 70 38 05
3770 3805 3770.3805 37.70.38.05
£295.00
INC VAT
£245.83 EX VAT
Complete 12v 300w alternator for Saprisa charging systems
No longer in production
Sorry, this part is no longer available.
28712400 GU28712400 28 71 24 00
2871 2400 2871.2400 28.71.24.00
Sorry this item is out of production
Brand new genuine Valeo starter motor and solenoid suitable as a direct replacement for Guzzi Valeo and Bosch 8 or 9 teeth starter motors. You may need to fit hex headed neutral switch bolts on some pre 1990 models to make room for the solenoid. Our part number for the bolt is SSA06016
Please note that this item may be fitted to Loop frame models with some modifications as described in Guzziology, also see https://www.thisoldtractor.com/moto_guzzi_loopframe_starter_-_how_to_replace_the_magneti_marelli_starter_with_a_valeo.html for advice on this upgrade.
This is a genuine Valeo starter made in the EU- please do not confuse with the cheap Chinese copies that sometimes appear on eBay.
Supercedes Guzzi refs. 12730705, 14730554 and 14730705
Please note you can get a discount of £30 on this item if you part exchange your existing faulty starter motor. See ELA30837 for less expensive alternative part
This part is due back in stock soon, call 01484 841395 to reserve yours
30730711 GU30730711 30 73 07 11
3073 0711 3073.0711 30.73.07.11
£231.00
INC VAT
£192.50 EX VAT
Regulator rectifier. See ELA32810 for alternative part
This part is available by special order, request a quote
883878 MG883878
£225.00
INC VAT
£187.50 EX VAT
Ducati type alternator stator
300W output, doesn't include rotor / magnet. Also known as Guzzi ref. 30712460
1 in stock
37712405 GU37712405 37 71 24 05
3771 2405 3771.2405 37.71.24.05
£210.00
INC VAT
£175.00 EX VAT
12 volt coil used on late Guzzis
Sometimes referred to as the 'square coil', two required per bike. See ELA00001 for crimp on HT lead connector
This part is due back in stock soon, call 01484 841395 to reserve yours
30716500 GU30716500 30 71 65 00
3071 6500 3071.6500 30.71.65.00
£190.00
INC VAT
£158.33 EX VAT