Valve guide

Also known as Guzzi ref. 13036800, 13036900, 13036700, 14036860, 13036801. See ENA90353 for valve guide circlips

 More than 5 in stock

 14036860 GU14036860 14 03 68 60
 1403 6860 1403.6860 14.03.68.60

Dimensions:
14mm external diameter x 52mm overall height

1 litre of Millers 75w-140 synthetic final drive lubricant and gearbox oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 75w140 synthetic gearbox and differential oil with performance additives designed for motorsport use.

700ml required for V7 and V85TT. 225ml required for V100.

Low friction reduces transmission noise.No need to use separate moly additive with this oil.


Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock

1 litre of Millers 80w-90 mineral based transmission oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure differential oil SAE 80w90 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for gearboxes and final drives.
Used as gearbox oil and final drive oil in 5 speed 850, 1000 and 1100 models. For CARC unit / bevel boxes on 850 and larger Breva, Norge, Griso, Stelvio, 1200 Sport and Cali 1400 models. Can also be used as gearbox oil on these models. For gearbox only on small twins. API GL-5 Quantities required:

• V11 Sport - gearbox: 0.85l, bevel box: 0.37l
• Daytona RS, 1100 Sport IE and Centauro - gearbox: 0.75l, bevel box: 0.25l
• Bellagio, 1200 Sport, Breva 850, 1100, Breva 1200, Griso, Norge, Stelvio - bevel box: 0.38l
• Cali 1400 - bevel box: 0.25l
• V35, V50, V65, V75, Nevadas, Breva 750, V7 Classic - gearbox: 0.9l,
• Convert gearbox: 0.60l, bevel box: 0.25l

Quick release coupling for fuel line, enables easier tank removal as QR connector can be located in a convenient location.

We recommend fitting this now before you snap the coupling on your fuel pump

 1 in stock

Dimensions:
for 8mm ID pipe

M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits in corrosion resistant grade 5 titanium as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787
See BRA36794 for rubber cap

 More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

Dimensions:
6mm threaded shank, 8mm across flats

Pair of EBC FA047 brake pads for Brembo F05 (P5) calipers and Grimeca front calipers

 More than 5 in stock

27654610-z 27654610 GU27654610 27 65 46 10
 2765 4610 2765.4610 27.65.46.10

Also fits Benelli 250 TS, Ducati Pantah 500SL, Magni Sfida

Dimensions:
7mm overall thickness

JMP cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633

 More than 5 in stock

 27153085 GU27153085 27 15 30 85
 2715 3085 2715.3085 27.15.30.85

Dimensions:
120mm x 45mm diameter overall

Valve collet

8 required per engine

 More than 5 in stock

 12038100 GU12038100 12 03 81 00
 1203 8100 1203.8100 12.03.81.00

Oil pressure sender

Can also be used in place of oil pressure switch 17768750 and adapter 19055800 on Monza (check which type your small twin uses before replacing). Replaces two part sensor 31999581.

See ENA12640 for replacement crush washer if required

 3 in stock

19768720-z 19768720 GU19768720 19 76 87 20
 1976 8720 1976.8720 19.76.87.20

1 litre of Millers 85w-140 mineral based final drive oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure drive box oil SAE 85w140 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for axles and final drives.
Low friction transmission oil reduces axle noise.No need to use separate moly additive with this oil.

170ml required for bevel box lubrication on all models except V9 which uses 210ml

Please note this part CANNOT be posted outside of the UK mainland area

 More than 5 in stock