Plastic inlet manifold, replaces unavailable aluminium manifold. Suitable for PHF 30 carb conversions on models previously fitted with VHB30 carbs. Contains inlet manifold, gasket, O rings, clip and M6 bolts to secure to head. Carb mounts direct to this manifold (no inlet manifold rubber required)

Note that on models with M8 inlet manifold bolts and standard heads (T3, 1000 SP) it will be necessary to drill out the manifold bolt holes from 6mm to 8mm to reuse your existing bolts. Can be used to replace PHF30 inlet manifolds 17116265 and 17116365 which are no longer available. These manifolds exit the heads at a different angle to VHB manifolds and in some cases you may need to modify side panels to allow clearance for air filters

 2 in stock

Dellorto accelerator pump diaphragm for PHF and PHM carbs

Also known as Guzzi ref 075527555

 2 in stock

 14931050 GU14931050 14 93 10 50
 1493 1050 1493.1050 14.93.10.50

Double pipe metal carb fuel union. Fuel filter FUA60888 sits inside this part and makes seal to carb

This double banjo union allows you to run a fuel balance pipe between carbs in place of crossover 'x' fuel pipe FUA29500. Ducati ref. 0615.27.890

 More than 5 in stock

Also fits Ducati 350 Twins, Ducati 500 Twins

Rear crankcase oil seal or rear main oil seal.

Fits Nevada 750 up to engine LT017877 and Nevada 350 to engine PC053625. Also known as Guzzi ref. 90405368. We recommend replacing the rear crank oil seal when replacing the clutch

 More than 5 in stock

90405367-z 90405367 GU90405367 90 40 53 67
 9040 5367 9040.5367 90.40.53.67

Replacement steering lock with 2 keys, fits into headstock

See FRA28551 for the steering lock cover flap and rivet. Also known as Guzzi ref. 12782830, 19782520

 4 in stock

 28782550 GU28782550 28 78 25 50
 2878 2550 2878.2550 28.78.25.50

Black plastic front mudguard extension or Fenda Extenda for lower mudguard MUA00244. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

 2 in stock

Also fits Aprilia Caponord (2013-2017)

Silver finish front engine guard to protect the front cover of you V100 from stone cips and corrosive road grime. Fit now before damage occurs

This engine cover manufactured is from AW5083 aluminium for toughness. Fit in conjunction with a EXTRA Fenda Extenda ACA58780 for maximum protection.

 1 in stock

Black plastic front mudguard extension or Fenda Extenda. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel

Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings as detailed above. See this video for help fitting yours

 2 in stock

Standard length Fenda Extenda for your front mudguard. Finished in matte black to blend in with your bike's standard mudguard. This will protect the exhaust pipes and front engine cover on your Guzzi from road debris, salt, water and traffic grime thrown up by your front wheel Specifically designed to follow the contour of your bike's front guard, our Extenda Fenda is supplied with both plastic rivets for mechanical fitment and a sheet of our specially sourced 'Stick Fit Pads' for those customers who would prefer not to drill their front mudguard. Our Extenda Fenda is simple to install and will arrive safely packaged, together with comprehensive fitting instructions and all necessary fittings.

 2 in stock

High performance aluminium velocity stack for airbox to throttle body union on single throttle body models. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock