Pair of wind deflectors in a matte finish, these fix to to your fuel tank behind the headstock to reduce buffeting at speed.

Supplied as a handed pair with black flanged screws for fitting.

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

 887483 MG887483

Dimensions:
M6 x 50mm

Sealed ball bearing used as rear wheel bearing for cast and spoked wheels

2 bearings required per wheel. Also used as front wheel bearing in spoked wheels on these models: Cali 1100, S3, T3, G5, Mille GT, Cali 3, Convert, Strada 1000, 1000S, Cali Jackal, Cali Stone, Cali Special (tube rim), Cali Vintage (tube rim), Cali Classic (2006-2007), 850 GT (disc braked version). Front wheel only for 750S / V7 Sport. Fits cush drive=/ drive plate on Nuovo Falcone

92204220-z 92204220 GU92204220 92 20 42 20
 9220 4220 9220.4220 92.20.42.20

Dimensions:
47mm OD

Swing arm taper roller bearing

2 races required per bike, supercedes unsealed bearing Guzzi ref. 92249217 and 92249216. See TRA90434 for oil seals

 92249213 GU92249213 92 24 92 13
 9224 9213 9224.9213 92.24.92.13

Dimensions:
40mm OD

Pinion roller bearing for drive box

92249227-z 92249227 GU92249227 92 24 92 27
 9224 9227 9224.9227 92.24.92.27

Dimensions:
52mm OD

Needle roller bearing for crownwheel

 92254340 GU92254340 92 25 43 40
 9225 4340 9225.4340 92.25.43.40

Dimensions:
55mm OD

Carrier bearing for UJ

92204228-z 92204228 GU92204228 92 20 42 28
 9220 4228 9220.4228 92.20.42.28

Dimensions:
58mm OD

Ball bearing for drive box output side

 92201070 GU92201070 92 20 10 70
 9220 1070 9220.1070 92.20.10.70

Dimensions:
110mm OD

JMP cartridge oil filter for 1989 on small block engines. See TOA19001 for a inexpensive tool to loosen and tighten the dipstick

For an oil change we also recommend 1x ENA90444 (Oil filter cover O ring), 1 x SIA10070 (large sump drain crush washer), 1 x SIA10900 (small sump drain crush washer) and 1 x SIA12200 (filter cover crush washer). Some 750 XPA models use SIA19530, we advise you to check your old filter before ordering. Also known as Guzzi ref. 2A000633

 27153085 GU27153085 27 15 30 85
 2715 3085 2715.3085 27.15.30.85

Dimensions:
120mm x 45mm diameter overall

1 litre of Millers 85w-140 mineral based final drive oil. Excellent anti-wear characteristics plus chemical stability and oxidation resistance to keep bearings and gears in optimum condition. This also allows long drain intervals

An extreme pressure drive box oil SAE 85w140 mineral based differential oil with performance additives. Use as received in Hypoid differentials requiring extreme pressure lubricants and GL5 specification.

Provides performance level specified by manufacturers for axles and final drives.
Low friction transmission oil reduces axle noise.No need to use separate moly additive with this oil.

170ml required for bevel box lubrication on all models except V9 which uses 210ml

Please note this part CANNOT be posted outside of the UK mainland area