Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Dimensions:
47mm OD

Brembo brake caliper rebuild kit for one P2 F08 (P8) caliper, contains 2 pairs of seals, O ring and 2 M10 bolts

This seal kit is for F08 calipers fitted to front of all these models. Also used on some Triumph Bonnevilles, MZs, Ducati 600 Pantah, 500 Pantah, 500 Sport Desmo, 500 GTV, 650 SL, 750 F1, 750 F1B, 750 Paso, 750 Sport, 900 MHR, 900 SS, 900 S2, 906 Paso, 100 R1, 100 S2 Desmo, Laverda Jota 1000 and Laverda 1200 Anniversary. Brembo ref. 120274110

See BRA10310 for less expensive replica kit

 14659000 GU14659000 14 65 90 00
 1465 9000 1465.9000 14.65.90.00

Also fits Benelli 354, Benelli Sei, Ducati 250/350/450 Desmo (-1976), Ducati Pantah, Ducati F1, Ducati 750 Paso (1987-1990), Ducati 750 Sport (1988-1990), Ducati 860 GT/GTS, Ducati 900 GTS, Ducati Hailwood Rep, Ducati 900 Darmah (1977-1978), Ducati 906 Paso (1988-1989), Ducati 1000 R1 Hailwood Ref., Hesketh, Horex HRD 600, Horex 500/600 Columbus, Laverda 750 SF2, Laverda 750 SFC, Laverda 750 SF3, Laverda 1000 3C (1974-1978), Laverda 1000 3CL (1976-1981), Laverda 1000 RGS/RGA, Laverda 1000 SFC, Laverda 1200 (1978-1979), Laverda 1200 TS/Mirage (1981), MZ ETZ 125/150/250/300 (1985-1992), Norton Classic (1989), Norton Interpol (1989), Triumph T140 (1985-1988 Brembo)

14 sided oil filter tool for Mahle filter SIA15301. Also fits the latest 14 sided version of the oil filter fitted to late CARC models.

This tool is for models where the sump needs to be removed to get to the oil filter. Not suitable for Champion or UFI oil filters

Dimensions:
81mm OD

Brush kit for overhauling Bosch starter motor

The brush connections need to be soldered

5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Dimensions:
24mm x 15mm x 25mm body

Modern solid state electronic regulator for models with Bosch charging system

Bolts to original mounting point but this replacement part is not as tall as the old metal regulator. Also known as Guzzi ref. 17703800. Replaces ELA29704

See our Bosch fault finder page for help diagnosing problems on your Bosch charging system. The original type mechanical regulator is no loger available

29703800-z 29703800 GU29703800 29 70 38 00
 2970 3800 2970.3800 29.70.38.00

Dimensions:
65mm x 40mm x 48mm

8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

Dimensions:
81mm OD

Get your bike running smoothly. The 2-column Carbtune Pro is for twins and will help you get your bike running smoothly and at its most powerful

Suitable for carb and fuel injected models

Thin walled spark plug spanner for 10mm plugs including the small long life PMR8B spark plug fitted to CARC models

05901930-z 05901930 GU05901930 05 90 19 30
 0590 1930 0590.1930 05.90.19.30

Dimensions:
12mm across flats, 69mm high

Pair of organic EBC FA256 rear brake pads for Hengtong caliper used on 2012 on models

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248, 2B001282

AP8133798