Pair of timing springs for mechanical advance mechanism on models equipped with points or electronic ignitions with mechanical advance

1 pair of distributor springs required per engine

 28753940 GU28753940 28 75 39 40
 2875 3940 2875.3940 28.75.39.40

Dimensions:
Springs are 21mm and 28mm respectively

Clutch cable

We advise you to measure your existing cable before ordering in case you have a non standard set up.

 03093045 GU03093045 03 09 30 45
 0309 3045 0309.3045 03.09.30.45

Dimensions:
Inner length 1580 mm, outer length 1480 mm

Front crank oil seal for models with Bosch or Ducati charging systems

Also known as Guzz ref. 90402839

 90402840 GU90402840 90 40 28 40
 9040 2840 9040.2840 90.40.28.40

Dimensions:
28mm x 38mm x 7mm

High performance Quadflex maintenance free Motobatt 12 volt 16.5Ah battery. Quadflex technology means you have two positive and two negative threaded terminals allowing maximum flexibility when installing. Motobatt absorbed gel matting batteries feature the latest absorbent glass mat technology and offer superior cranking power (210 CCA). This offers increased lifespan, higher vibration resistance and electrical performance. This battery is also leak, vibration and spill proof if installed correctly.
For models listed with twin throttle bodies

Supplied charged and ready to fit with terminal brackets and button head screws. Can be used to replace OE Yuasa battery Guzzi ref. 640201
NB This battery must not be trickle charged or charged using a traditional manual charger, AGM batteries require a smart charger - we recommend ACA96000
For more information on charging AGM batteries see these FAQ's.
This battery is for dual throttle body small twins.

One year warranty on all our Motobatt batteries.

Also available at the same price in black by special order - call 01484 841395 to order

Please note this part CANNOT be posted outside of the UK mainland area

 01180114 GU01180114 01 18 01 14
 0118 0114 0118.0114 01.18.01.14

Dimensions:
133mm x 175mm x 92mm

Drive box input seal

Pinion oil seal

90403251-z 90403251 GU90403251 90 40 32 51
 9040 3251 9040.3251 90.40.32.51

Dimensions:
47mm OD

Swingarm bearing oil seal

Dust seal for swingarm bearing

 90403040 GU90403040 90 40 30 40
 9040 3040 9040.3040 90.40.30.40

Dimensions:
40mm OD

M16 stainless steel half nut and washers for front wheel spindle. Includes flat and wavy washer

NB this is a half nut. Can also be used as alternator retaining nut 92603516

92602516-z 92602516 GU92602516 92 60 25 16
 9260 2516 9260.2516 92.60.25.16

Dimensions:
M16

M12 pivot bolt kit for brake and gear lever pivots on Tonti framed models. Kit consists of 1 M12 bolt (with hex head and slotted other end), wavy washer, flat washer and half nut

Beautifully made to enhance the appearance of your bike, also cheaper than OE non stainless parts. Guzzi parts refs: 30252360, 98073660, 95100409, 92701120, 17252350. Does not fit G5

98053660-z 98053660 GU98053660 98 05 36 60
 9805 3660 9805.3660 98.05.36.60

Dimensions:
M12

Output oil seal for drive box

This oil seal fits output side of bevel box

90407085-z 90407085 GU90407085 90 40 70 85
 9040 7085 9040.7085 90.40.70.85

Dimensions:
70mm x 85mm x 8mm

Front oil seal for cam shaft

90401530-z 90401530 GU90401530 90 40 15 30
 9040 1530 9040.1530 90.40.15.30

Dimensions:
15mm x 30mm x 7mm