Tarozzi fork brace, this will help prevent forks twisting under heavy cornering and is a good handling upgrade for older bikes.
1 in stock
Sorry this item is out of production
Dimensions:
203mm vertical mounting centres, 580mm wide at widest point, 550mm top to above headlight
Tinted standard size screen with mounting holes and beaded edge
Mount this screen using the following parts: FAA60001A (chrome) or FAA60001G (black) + upper arms FAA60001D
See FAA60001B if you just need the screen mounting screws.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike
1 in stock
18577350 GU18577350 18 57 73 50
1857 7350 1857.7350 18.57.73.50
£90.00
INC VAT
£75.00 EX VAT
Dimensions:
227mm vertical mounting centres, 700mm at widest point, 470mm from above headlamp to top edge
Large tinted screen with chrome edging
Use fitting kit FAA60008.
To simplify installation always mount a screen on to the mounting brackets before mounting the brackets on the bike.
Note that due to the tight radius of the chome trim the finish may not be perfectly smooth
1 in stock
29577350 GU29577350 29 57 73 50
2957 7350 2957.7350 29.57.73.50
£77.20
INC VAT
£64.33 EX VAT
Standard grey tinted screen for headlamp fairing. Includes screen edge trim.
Fitting kits available separately. Screen fasteners are FAA98417 x 3, FAA04001 x 6, FAA90035 x 3, FAA92104 x 3
2 in stock
14577250-z 14577250 GU14577250 14 57 72 50
1457 7250 1457.7250 14.57.72.50
£54.00
INC VAT
£45.00 EX VAT
Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.
Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions.
Suitable for all models originally fitted with points which have a mechanical advance / retard . Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101
Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:
1 in stock
£225.00
INC VAT
£187.50 EX VAT
Complete Newtronic electronic ignition kit containing ignition pickup (distributor mounted) and ignition box. Retains original mechanical advance / retard mechanism.
Kit consists of sensor plate and pickups, magnet, ignition box, clip, screws and instructions.
Suitable for all models originally fitted with points which have a mechanical advance / retard . Can also be fitted to Strada 1000, Spada 3, Cali 3 etc... if the distributor is swapped for a points type part with advance / retard mechanism. Coils should have 4 Ohms resistance on the low tension circuit, OE coils will work OK but you may see improved results with high performance Dyna coil ELA14101
Developed from the original Piranha system, Newtronic ignitions are contact breaker replacement ignition systems covering a range of Japanese and European motorcycles from the late 1950's onwards. Using contactless, maintenance free, infra red triggering the Newtronic ignition has gained a reputation for ease of installation and effectiveness from satisfied motorcyclists around the World. The switching units include an integrated timing LED for each channel, making it quick and easy to accurately time each cylinder independently (an essential step in gaining the best performance from your engine.). The system typically consists of three main components:
3 in stock
£225.00
INC VAT
£187.50 EX VAT
Dellorto 8.5g float with tang for needle valve
Most Guzzi big twins originally had 10g floats- see FUA14001
4 in stock
14933000 GU14933000 14 93 30 00
1493 3000 1493.3000 14.93.30.00
£22.50
INC VAT
£18.75 EX VAT
Pair of chrome tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
1 in stock
£53.00
INC VAT
£44.17 EX VAT
Pair of black tubular rocker cover protector bars for round and square barrel engines, these will protect barrels and rocker cover in the unfortunate event of your bike being dropped
These head protectors bolt to the head using existing rocker cover bolts, they won't fit models with fairing lowers that wrap around the cylinders (e.g. Spada) without modification. To modify simply reduce the length of the rear section of the bar to stop short of the fairing and insert the supplied grommet. These bars are supplied with a plastic grommet for each end, this will need chamfering or leaving off on round head models with bolt on rocker cover breather pipes, e.g. T3. These bars will not fit on a T3 or other model with knee pads
1 in stock
£44.00
INC VAT
£36.67 EX VAT
Chromed fork stanchion
2 in stock
39525401-z 39525401 GU39525401 39 52 54 01
3952 5401 3952.5401 39.52.54.01
Also fits Benelli 504
£105.00
INC VAT
£87.50 EX VAT