Manual right hand petrol tap with nut. On, Off and Reserve settings.

Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe

65105401-z 65105401 GU65105401 65 10 54 01
 6510 5401 6510.5401 65.10.54.01

Also fits Laverda Jota

Dimensions:
M16 x 1 threaded section, 8mm fuel spigot

Carb gasket kit / rebuild kit for 1 Dellorto PHF carb. Suitable for all PHF carbs with accelerator pumps including PHF36. Dellorto ref. 52514-77

Carb overhaul kit, float bowl seal FUA90001 and fuel filter FUA60888 also available separately to this carb seal kit

 14939950 GU14939950 14 93 99 50
 1493 9950 1493.9950 14.93.99.50

Also fits Hesketh, Laverda

UFI 31 504 00 fuel filter, threaded connections, includes copper washers. See FUA29107 for alternative filter from Mahle

Replace every 6000 miles. Replaces Guzzi refs. 29106060 and 29999660. Only for series 1 Daytona 1000. Will not fit early Cali 3s which have filters with two 14mm threads.

 29106061 GU29106061 29 10 60 61
 2910 6061 2910.6061 29.10.60.61

Dimensions:
approx 140mm x 60mm diameter. M14 + M12 threads

Pair of organic EBC FA256 rear brake pads for Hengtong caliper used on 2012 on models

Twin pin fitting. Pre 2012 V7 models use a different brake pad with only one pad pin hole. Also known as Guzzi ref 2R000248, 2B001282

AP8133798

32mm fork seal

Also known as Guzzi ref. 90403144

 90403142 GU90403142 90 40 31 42
 9040 3142 9040.3142 90.40.31.42

Dimensions:
32mm x 9mm

1 metre of Ariete fuel pipe suitable for fuel and breather pipe applications on gravity fed non injection models, cut your fuel lines to your own spec. Pipe can be stretched to 7.5-8mm if heat is applied

Certified ethanol proof and safe for modern E10 fuel. Hose clips also available, see FUA00004 or FUA00005

Dimensions:
6mm ID x 9mm OD x 1 metre length

Gearbox input seal and output shaft oil seal on big twins, fork seal on Nuovo Falcone. Used as crownwheel shaft oil seal on small twins. Output seal only on 4 speed gearboxes

Supercedes Guzzi ref. 90403547. Used as crownwheel carrier seal on small twins Also known as Guzzi ref. 90403549

 90403548 GU90403548 90 40 35 48
 9040 3548 9040.3548 90.40.35.48

Dimensions:
47mm OD

5 pin mini relay

Also known as Guzzi ref. 30732560 Can be used in place of 4 pin mini relay ELA01561. We recommend keeping a spare one in your tool kit

 01731760 GU01731760 01 73 17 60
 0173 1760 0173.1760 01.73.17.60

Dimensions:
24mm x 15mm x 25mm body

8 sided oil filter tool for new UFI filters

This tool is for models where the sump needs to be removed to get to the oil filter. This fits SIA14530 and the later metal finish filter SIA15300 which was updated to 8 sides in late 2018. Not suitable for Mahle oil filters

Dimensions:
81mm OD

Round 12v two pin flasher relay

See FRA17720 for rubber mount, item may look different to this please take into consideration before ordering.

 17750520 GU17750520 17 75 05 20
 1775 0520 1775.0520 17.75.05.20

Dimensions:
32mm diameter