Page 31 of 31
Sort by Title    | Sort by Price |
Fits Moto Guzzi V7 Classic, V7 Cafe Classic (2007-2012), V7 Racer (2009-2011), Cali EV (2002-2009), Centauro, Daytona, V11 Sport (2003-2006), Quota 1100, Bellagio, 1200 Sport ALL, Breva 1100, Breva 1200, Norge ALL, Griso ALL, Stelvio ALL
V-Twin Boost Plug-In Fuelling Fixer
FUA01001 | £112.00 INC VAT£93.33 EX VAT |  | The V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.
The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory! - Quick and easy installation
- Resistant to atmospheric agents and vibrations
- Optimized by Mistral for your bike
- Best response to the opening of the throttle
- Better torque at low-medium range
- Reduction of the on/off effect
- Correct air/fuel ratio in all conditions with real-time modification
|  | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| | | |
|
Fits Moto Guzzi Cali EV (1997-2001), Cali Jackal, Cali Stone, Stelvio ALL, Griso 1200, 1200 Sport ALL
Vario Riser Set Black
HAA10129 | £112.40 INC VAT£93.67 EX VAT | 
 | Vario riser kit allows you to finetune your riding position by rotating the handlebars back and or up. You can move the handlebars back by up to 40mm and up by as much as 40mm resulting in much improved comfort. A pair of spacers allow you to finetune the amount of rise. Finished in black, this is a high quality German engineered kit. Kit contains fitting instructions, zinc finish bolts, handlebar clamps and risers. It is very difficult to change the riding position on many Guzzi's as the handlebars often have special drillings or bar ends, this kit allows you to keep your handbars whilst improving the riding position. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit. | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 28mm OD handlebars | | |
|
Fits Moto Guzzi V35 I, V35II, V35 3, V35C, V50 I, V50 II, V50 3, V50C, V65 ALL, V75, Nevada 750 (1991-), Convert, G5, T3, T3 Cali, T4, T5, 1000 SP, SP II, Mille GT, Quota ALL, Cali 3 ALL, Cali 1100 (1994-1997), Breva 750, V7 Classic (2008-2012), V7 Stone (2012-2013), V7 Special (2012-2015), V7 II Special, V7 II Stone
Vario Riser Set Black
HAA10123 | £112.40 INC VAT£93.67 EX VAT |
| Vario riser kit allows you to finetune your riding position by rotating the handlebars back and or up. You can move the handlebars back by up to 40mm and up by as much as 40mm resulting in much improved comfort. A pair of spacers allow you to finetune the amount of rise. Finished in black, this is a high quality German engineered kit. Kit contains fitting instructions, zinc finish bolts, handlebar clamps and risers. It is very difficult to change the riding position on many Guzzi's as the handlebars often have special drillings or bar ends, this kit allows you to keep your handbars whilst improving the riding position. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 22mm OD handlebars | | |
|
Fits Moto Guzzi V35 I, V35II, V35 3, V35C, V50 I, V50 II, V50 3, V50C, V65 ALL, V75, Nevada 750 (1991-), Convert, G5, T3, T3 Cali, T4, T5, 1000 SP, SP II, Mille GT, Quota ALL, Cali 3 ALL, Cali 1100 (1994-1997), Breva 750, V7 Classic (2008-2012), V7 Stone (2012-2013), V7 Special (2012-2015), V7 II Special, V7 II Stone
Vario Riser Set Silver
HAA10122 | £112.40 INC VAT£93.67 EX VAT | 
 | Vario riser kit allows you to finetune your riding position by rotating the handlebars back and or up. You can move the handlebars back by up to 40mm and up by as much as 40mm resulting in much improved comfort. A pair of spacers allow you to finetune the amount of rise. Finished in silver, this is a high quality German engineered kit. Kit contains fitting instructions, zinc finish bolts, handlebar clamps and risers. It is very difficult to change the riding position on many Guzzi's as the handlebars often have special drillings or bar ends, this kit allows you to keep your handbars whilst improving the riding position. Normally this kit can be fitted without modifying your brakelines or control cables.
Improve riding comfort with this riser kit | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| Dimensions: For 22mm OD handlebars | | |
|
Fits Moto Guzzi V11 Sport | Workshop Stand
TOA00717 | £118.00 INC VAT£98.33 EX VAT |  | Clever stand which makes working on your bike much easier! This stand clamps safely to the bolts just underneath the rider footrests, and allows you to lift the bike securely in a similar action to a centrestand. Useful substitute for a centre stand.
Needs 2 x 18mm 0.5 inch drive sockets to fit a V11 (not supplied) | | This item is currently available by special order, if you would like to order this item please call us on 01484 841395 or email us. It is normally available within one to three weeks of your order
| 979717 MG979717 | | |
|
Page 31 of 31
|
Secure online shopping with SagePay 
