The Moto Guzzi Spares Service

Shop headings: New Spares | Used Spares | Accessories | Brands

The Shop

New Spares Recently Back In Stock

Sort by Title

Sort by Price

Page 12 of 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18

Titanium Rocker Cover Screw

SSA87483 Fits V7 Special (2013-2014), V7 Stone (2012-2014), V7 II ALL, Nevada 750 (Chassis numbers ZGULML00 / ZGULMM00)

Dimensions:
M6 x 50mm

Titanium shouldered retaining screw for rocker cover. 4 required for each cylinder head

Rocker cover bolt for single throttle body models. Upgrade your corrosion prone zinc OE parts with a polished upgrade.

part in stock More than 5 in stock

887483 MG887483

£7.50

INC VAT

£6.25 EX VAT this is the price you will pay if you are ordering from outside the UK

HT Lead Copper Core

ELA18135 Universal Part

Dimensions:
100cm

One metre of copper core HT lead, this is superior to the more commonly available carbon core lead

Sold by the metre, one metre is enough for two leads on most models with coils under the fuel tank. For models with coils under the side panel you will need two metres. See ELA14715 and ELA14714 for plug caps and ELA20001 for coil screw cap. See ELA00001 for crimp on HT lead connector

part in stock More than 5 in stock

£7.00

INC VAT

£5.83 EX VAT this is the price you will pay if you are ordering from outside the UK

PS16 Rear Master Cylinder Remote Type

BRA19001 Fits V65 Florida, Lario, V65, V65, V35, V50, V50 PA, V65 PA, V75, 750 SP, Strada 750, 750 Targa, 750T, Nevada 350, Nevada 750 (1993-2003 Series 2), Le Mans 1000, 1000S, Cali 1100 (1994-1997), Cali EV, Cali Jackal, Cali Stone

Brembo PS 16 rear master cylinder for models with a remote reservoir, suitable as a replacement for the standard PS15 master cylinder which has now been discontinued by Brembo. Supplied with operating lever. Mounting holes at 50mm centres

Brembo ref. 10.2934.02 See BRA19500 for the elbow that the fluid supply pipe fits onto. Also see BRC19001 for a reconditioned PS15 MC

part in stock 1 in stock

19667000 GU19667000 19 66 70 00
1966 7000 1966.7000 19.66.70.00

£195.00

INC VAT

£162.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal Bevel Box Output

TRA90590 Fits V35 ALL, V50 ALL, V65 ALL, V75, 750 Targa, Strada 750, Nevada 350, Nevada 750 (1991-2002), Breva 750 (2003-2005)

Dimensions:
90mm OD

Final drive inner seal

For Breva 750 up to frame no. LL111907

part in stock More than 5 in stock

90407590-z 90407590 GU90407590 90 40 75 90
9040 7590 9040.7590 90.40.75.90

£9.00

INC VAT

£7.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Oil Seal Bevel Box Output

TRA90591 Fits Breva 750 (2005-2007), V7 Classic, V7 Racer, V7 Cafe, Nevada 750 (2002-2016), V7 II ALL, V7 III ALL

Dimensions:
95mm OD

Final drive inner output seal

For Breva 750 from frame no. LL111908

part in stock More than 5 in stock

90407591-z 90407591 GU90407591 90 40 75 91
9040 7591 9040.7591 90.40.75.91

£15.80

INC VAT

£13.17 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Release Bearing

CLA12002 Fits 750S, V7 Sport, S3, 850/1000 ALL Models, V7 700, V7 Special (1969-1971), 850 GT, 1100 Sport ALL, Cali 1100 (1994-1997), Cali EV, Quota 1100, V11 Sport ALL, Griso 1100, Griso 850, Breva 1200, Breva 1100, Bellagio, Breva 850, Cali Vintage, Norge ALL, V35 ALL, V50 ALL, V65 ALL, V75 ALL, V7 Classic, V7 Special, V7 Cafe, V7 II ALL, V7 III ALL, V9 ALL, Nevada ALL, Centauro, Daytona

Dimensions:
22mm OD

Clutch thrust bearing complete, sits in recess in rear gearbox casing.

This bearing is the higher quality OE bearing used on recent models

part in stock 3 in stock

2A000376

£21.00

INC VAT

£17.50 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Pushrod

CLA14085 Fits 850/1000 All Models, Cali 1100 (1994-1997), Cali EV, 1100 Sport ALL, Quota 1100, Centauro, Daytona

Dimensions:
246mm x 6mm

Clutch pushrod

part in stock 1 in stock

14085700 GU14085700 14 08 57 00
1408 5700 1408.5700 14.08.57.00

£30.00

INC VAT

£25.00 EX VAT this is the price you will pay if you are ordering from outside the UK

Clutch Friction Plate

CLA32410 Fits V65 ALL, V75 ALL, Nevada 750 ALL, Breva 750, V7 Classic, V7 Racer, V7 Cafe, V7 Stone, V7 Special (2012-), V7 II ALL

Clutch friction plate

Also known as Guzzi ref. 27084460

part in stock 3 in stock

32084410-z 32084410 GU32084410 32 08 44 10
3208 4410 3208.4410 32.08.44.10

£130.00

INC VAT

£108.33 EX VAT this is the price you will pay if you are ordering from outside the UK

Fork Seal

SUA03530 Fits 1200 Sport, Bellagio, Breva 850, Breva 1100, Breva 1200, Norge, Cali EV, Cali Jackal, Cali Stone, Cali Special Sport, Stelvio (2011-), Vintage

Dimensions:
45mm x 58mm x 11mm

Quality Ariete fork Seal

Also known as Guzzi ref. 03530526 and 03530524

part in stock 4 in stock

AP8163095

£13.00

INC VAT

£10.83 EX VAT this is the price you will pay if you are ordering from outside the UK

Brake Bleed Nipple 6mm Stainless Steel

SSA00470 Fits V35, V50, V65, V75, G5, S3, T3, Convert, 1000 SP, Le Mans 1, Le Mans 2, Nevada 750 (1991-2001), Nevada 350, V7 Sport, 850 GT, Stelvio ALL, Breva 1100, Breva 850, Breva 1200, 1200 Sport ALL, Norge ALL, Bellagio, Griso ALL

Dimensions:
10mm threaded shank, 8mm across flats

A4 marine grade stainless steel M6 bleed nipple for Brembo F05 and twin bleed P2 F08 & F09 calipers. Manufactured specially for Gutsibits as a replica of the original Brembo M6 bleed nipple

Use M10 bleed screw SSA36794 for single bleed (later) P8 calipers. Ducati ref. 079539787

See BRA36794 for rubber cap

part in stock More than 5 in stock

Also fits Benelli 250 TS, Ducati 350-500 Twin, Ducati 350-500 Twin GTV, Ducati 350-500 Twin Sport, Ducati 500 SL Pantah, Ducati 500 Sport Desmo, Ducati 600 SL Pantah, Ducati 750 F1/Laguna Sec, KTM 250XC, KTM 250SX, KTM 250EXC,

£8.00

INC VAT

£6.67 EX VAT this is the price you will pay if you are ordering from outside the UK

Page 12 of 18

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18