Pair of short reverse cone stainless steel performance silencers from Mistral, the reverse cone design compliments the classic styling of the V7 models. Supplied with removable DB killer these are a more durable, stylish, lighter and better sounding than the original silencers.

5kg lighter that stock silencers
Increased power

Euro 5 compliant
No remap required
All Mistral exhausts are hand made in Mandello using high quality components, Mistral develop exhausts that get the best performance from your Moto Guzzi.
Supplied with silencer clamps and certificate of homologation, reuse your existing silencer brackets with these silencers.You will also need centre stand stop bracket FRA34373 if you have the Guzzi centre stand fitted.

Silencer shims not required

Release the music in your Guzzi!

 1 in stock

HIgh performance aluminium velocity stack for airbox to throttle body union. This velocity stack replaces the standard part with an aluminium part that protrudes into the airbox. Through careful design it improves the engine response by providing an increased volume of less turbulent air to the throttle body. No modifications are required to fit this velocity stack but you should see a torque increase of around 6% at 2500 RPM and 3% increase in power at 6500 RPM

This manifold is suitable for EURO 4 and 5 models, manufactured on the shores of Lake Como. Developed for optimum power and torque on Mistral's rolling road. For best results combine with a performance air filter - SIA10434

Simple to fit, installation time is less than 30 minutes and the battery does not need to be disconnected.

 1 in stock

Stainless steel exhaust cover for the exhaust link pipe and CAT. Fits easily to the standard exhaust system to improve the styling of the V100. This brushed stainless finish cover also helps shield your feet from the heat of the CAT. Note that this accessory is not compatible with a centre stand.

A quality accessory hand made in Italy for your V100

 1 in stock

Kit of 4 black frame caps to tidy up the bolt heads for the pillion and exhaust footpeg hanger

Simple installation, lasting looks

 2 in stock

The Mistral V-Twin boost is an effective and cost efficient way to cure the fuelling problems common to all modern fuel injected Guzzi's. The V85 TT runs particularly lean and will benefit more than most bikes from the installation of a V-Twin Boost.
Plugging directly into the wiring harness using original connectors, with no cutting or splicing required, installation takes less than ten minutes.

The V-Twin boost features a unique technology to provide your bike with a controlled fuel enrichment.
Make your bike run as it should have done from the factory!

• Quick and easy installation
• Resistant to atmospheric agents and vibrations
• Optimized by Mistral for your bike
• Best response to the opening of the throttle
• Better torque at low-medium range
• Reduction of the on/off effect
• Correct air/fuel ratio in all conditions with real-time modification

 1 in stock

UFI 27 77 900 conical air filter

See FUA90552 for air filter housing O ring

 More than 5 in stock

 17113651 GU17113651 17 11 36 51
 1711 3651 1711.3651 17.11.36.51

Dellorto needle valve kit comprising of valve and felt washer. For PHF36 and PHM40 carbs

Also known as Guzzi ref. 076527649, 14939150 and Ducati ref. 076527645, 0765.27.645

 2 in stock

 14939150 GU14939150 14 93 91 50
 1493 9150 1493.9150 14.93.91.50

Also fits Ducati 750/900 SS Koewe, Ducati 750 F1/Laguna Seca, Ducati 900 MHR, S2, Ducati 900 MHR-I, Ducati 1000 MHR-2,S2

Full workshop manual for mk 1 V7 Classic models covering maintenance, overhaul and detailed repair. Also relevant for other V7 mk 1 models with twin throttle bodies

Includes tolerances for many parts and a wiring diagram. n.b. These are comb bound reprints

 1 in stock

 981078 MG981078

Workshop manual for V85 TT models covering maintenance, overhaul and detailed repair. Note that engine overhaul is covered in a separate supplement - BOA85383

Includes tolerances for many parts, maintenance schedule and exploded diagrams. This is a comb bound reprint

 1 in stock

2Q000400

Pair of organic EBC FA244 front brake pads for P4 30/34 F calipers with two pad pins (Brembo 6800 and 9970 calipers)

Guzzi pad reference is 01654630. Also fitted to some pre 2001 Cali EV's - check how many pins your brake caliper has if ordering for a 1997-2001 Cali EV. Also known as Guzzi ref. 2B003313, 61340211A, 01654630, 07670810, 07BB1935, AP8133614, 883673, 2B005736

 More than 5 in stock

 32654610 GU32654610 32 65 46 10
 3265 4610 3265.4610 32.65.46.10