Long reach spark plug spanner for all two valves per cylinder twins. This plug spanner fits the large spark plug on twin plugged models, see TOA05931 for a spanner for the small long life PMR8B spark plug

 1 in stock

Pair of engine crash bars finished in tough black. The heads and rocker covers are vulnerable on these bikes and can be badly damaged by even a minor accident, replacement cost can be more than £1000 so protect your bike with these bars.

Supplied with fitting hardware and bracket finished in black, this crashbar has been specially developed for the second generation V7. See our technical documents section for installation instructions. Engine bars - essential protection for your bike.

 1 in stock

Metal bush for foot brake or gear lever pivot

 3 in stock

 30678160 GU30678160 30 67 81 60
 3067 8160 3067.8160 30.67.81.60

Dizzie rotor arm

 1 in stock

 12715431 GU12715431 12 71 54 31
 1271 5431 1271.5431 12.71.54.31

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 4 in stock

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Dellorto 8.5g float with tang for needle valve

Most Guzzi big twins originally had 10g floats- see FUA14001

 4 in stock

 14933000 GU14933000 14 93 30 00
 1493 3000 1493.3000 14.93.30.00

Replacement regulator rectifier for models fitted with the Ducati charging system. This is a quality unit and is supplied with fitting instructions

Connections: 2 x yellow male bullet, 1 x white female bullet, 1 x black ring, 1 x red ring. You will need to reuse your existing block connectors to connect this to your loom. See this wiring diagram for wiring connections

 1 in stock

37703805-z 37703805 GU37703805 37 70 38 05
 3770 3805 3770.3805 37.70.38.05

Pivot bolt for gear and brake pedals

Lever bolt also known as 884033

 1 in stock

AP8121223

Also fits Aprilia 1000 RSV4 R APRC , BJ 2013 - 2014, Aprilia 1000 RSV4 RF , BJ 2017 -, Aprilia 1000 RSV4 RR , BJ 2015 - 2017, Aprilia 1100 Tuono V4 Factory , BJ 2015 -, Aprilia 1200 Caponord Rally , BJ 2015 - 2017, Aprilia 125 Tuono , BJ 2017 -, Aprilia 750 Shiver , BJ 2014 - 2017

Black plastic alternator cover with Moto Guzzi in white text

See ACA18650 for polished aluminium alternator covers

 1 in stock

18001650-z 18001650 GU18001650 18 00 16 50
 1800 1650 1800.1650 18.00.16.50

The innovative stahlbus bleeder valve allows you to change the brake fluid yourself without assistance. You may find it helpful to fit this valve to the proportioning valve or manifold on your Guzzi. M10 bleed screw used only on rear of 2003 on models

Linked Guzzi brake systems are notoriously tricky to bleed, this special bleed nipple can save you hours of tedious squeezing and pumping!

• Completely sealed by O-ring.
• Hydraulic system remains sealed even during the venting process.
• Reliable non-return function on this auto bleed valve, thus one-man operation.
• System has been bled in minutes.
• Wear of the threads in the caliper is prevented (up and screwing down during the bleeding process).
• For all hydraulic systems such as brakes and clutches stahlbus brake bleed valve just replaces the existing vent screw.
• Tested under extreme conditions by TÃœV Rheinland.
  See BRA41652 for bleed valve cover

   2 in stock

  [ CLOSE WINDOW ]
  [ CLOSE WINDOW ]