
Shop headings: New Spares | Used Spares | Accessories | Brands

Manual left hand petrol tap with nut and fuel level sender. On and off settings.
Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe
1 in stock23105370-z 23105370 GU23105370 23 10 53 70
2310 5370 2310.5370 23.10.53.70
Dimensions:
M16 x 1 threaded section, 140mm sender
£29.00
INC VAT
£24.17 EX VAT ![]()

Manual petrol tap with nut and filter. On and off settings.
Point on lever faces back in off position. Used for RH applications on some models. TAA65401A or TAA65401B can be substituted for this part. Used for LH and RH fuel tap on Cali 1100
1 in stock23105470-z 23105470 GU23105470 23 10 54 70
2310 5470 2310.5470 23.10.54.70
Dimensions:
16mm threaded section, 8mm fuel pipe spigot
£24.00
INC VAT
£20.00 EX VAT ![]()

Set of ignition points (made up of two boxes of contacts)
More than 5 in stock 19709620 GU19709620 19 70 96 20
1970 9620 1970.9620 19.70.96.20
£39.50
INC VAT
£32.92 EX VAT ![]()

Thottle cable, runs from twistgrip to carb
We advise you to measure your existing cable before ordering in case you have a non standard set up.
4 in stock 19117580 GU19117580 19 11 75 80
1911 7580 1911.7580 19.11.75.80
Dimensions:
1020mm outer length, 96mm free length, 5.7mm barrel nipple, 2.7mm barrel nipple
£10.00
INC VAT
£8.33 EX VAT ![]()

Manual right hand petrol tap with nut. On, Off and Reserve settings.
Will also fit most other Moto Guzzi tanks from 1976 to 1991, these can be used to replace discontinued electric taps but please measure first and check you have space for outlet pipe
More than 5 in stock65105401-z 65105401 GU65105401 65 10 54 01
6510 5401 6510.5401 65.10.54.01
Also fits Laverda Jota
Dimensions:
M16 x 1 threaded section, 8mm fuel spigot
£12.60
INC VAT
£10.50 EX VAT ![]()

Black rubber UJ gaiter / boot, clips available separately - see SSA64990 and TRA12544
More than 5 in stock 18548000 GU18548000 18 54 80 00
1854 8000 1854.8000 18.54.80.00
Dimensions:
54mm internal diameter (small end), 70mm diameter (big end) x 40mm
£12.50
INC VAT
£10.42 EX VAT ![]()

Inlet manifold rubber. Fits between exhaust manifold on cylinder head and carb
Use clip SSA25950
3 in stock19114320-z 19114320 GU19114320 19 11 43 20
1911 4320 1911.4320 19.11.43.20
Dimensions:
33mm ID x 39mm length
£8.00
INC VAT
£6.67 EX VAT ![]()

Round 12v two pin flasher relay
See FRA17720 for rubber mount, item may look different to this please take into consideration before ordering.
More than 5 in stock 17750520 GU17750520 17 75 05 20
1775 0520 1775.0520 17.75.05.20
Dimensions:
32mm diameter
£7.60
INC VAT
£6.33 EX VAT ![]()

Carb gasket kit / rebuild kit for 1 Dellorto PHF carb. Suitable for all PHF carbs with accelerator pumps including PHF36. Dellorto ref. 52514-77
Carb overhaul kit, float bowl seal FUA90001 and fuel filter FUA60888 also available separately to this carb seal kit
More than 5 in stock 14939950 GU14939950 14 93 99 50
1493 9950 1493.9950 14.93.99.50
Also fits Hesketh, Laverda
£18.95
INC VAT
£15.79 EX VAT ![]()

12 volt ignition coil for models equipped with points, Bosch or Motoplat ignition systems, includes HT lead. Terminal layout is different to original coils- see photos.
Not for Digiplex models. Also known as Guzzi ref. 19716500, 19716520
More than 5 in stock 31716560 GU31716560 31 71 65 60
3171 6560 3171.6560 31.71.65.60
Dimensions:
80mm mounting spacing
£38.10
INC VAT
£31.75 EX VAT ![]()